Vacuum transport systems are used to pneumatic transport of powder and granulated materials. Typical material for transportation plastic raw material. Vacuum systems can be manufactured for single or multipurposes. System can be also built to independent portable unit.
There is two kinds of unloading stations. Unloading station can be either with wet or dry discharge devices. Both discharge systems are located under the lower room of silos. Wet discharge devices are used for example in loading bulk materials from silos to open container trucks and dry discharge devices in loading to tank trucks. In the bottom of ...
Overland belt conveyor system for the project Yandi, Australia. Overland belt conveyor system comprises of 2 belt conveyors 90 m (295 ft) and 5 200 m (17 060 ft) in length. Designed to convey iron ore from the semi-mobile primary crushing station to the existing stockpile area. To allow for a future relocation the conveyor has been designed using ...
Depending on the nature of the organic material in the waste stream BioGills have, on average, a removal rate of 10,000-13,000 mg/L in a single day, although up to 50,000 mg/L of BOD from solution has also been achieved in a single day.BioGills have successfully treated wastewaters that kill the biomass in other treatment systems.
Underground belt conveyor system for the project Tabas coal mining, Iran. Underground conveyor system comprises 18 belt conveyors. To convey ROM coal and waste material out of mine.
Underground belt conveyor for the project West Wallsend, Australia. Designed to upgrade of underground drift and surface conveyors for West Wallsend colliery in the Hunter Valley. Upgrade which increased the conveying rate from 1 250 t/h to 2 650 t/h was carried out as a retrofit.
UPAMAT-V series baling presses achieve throughputs of up to 70 t/h. The vertically arranged and fully automatic tying-up unit with a separate wire cut is pathbreaking. Machines of this series have quadruple or quintuple vertical tying-up units and can be provided optionally with other equipments such as pushers, material distributors, ...
The KAMADUR industrial knives B.V. program for the wood industry consists of: Knives to chippers and flakers for brands like Schliessing, Jenz, Tünnisen. Veneer knives for brands like Josting, Shredder blocks and toothed counter knives for brands like Vecoplan and Weima.
Arm height: from 2,4m to 4m according version. Adaptable on many types of vehicles. Possibility to add a high pressure washing station and a washing ramp.
Continuing increases in the cost of energy, and projected shortages of fuel oil feed stocks have re-emphasized the need for the development of alternate fuels and conservation of our present resources. Reclamation and reuse of valuable heat energy from processing operations represents one of the best opportunities for fuel conservation.