press containers Equipment in São Tomé & Príncipe

Serving São Tomé & Príncipe | Near São Tomé & Príncipe
56 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Waste Containers ×

  • Keyword: press containers ×

  • Location: Africa ×

  • Location: São Tomé & Príncipe ×

Avermann - Press Container for Skip

by Avermann Maschinenfabrik GmbH & Co. KG     based in Osnabrück, GERMANY

With our mobile compactors for settler vehicles opt for flexibility. You get the machine with either: oblique or high sidewalls, individual opening options, 4-point locking, Gate valves etc. Individual requirements for the preparation of course we can take into account, such as head or side filling. Even as a ramp-up.

Valvan - Automatic Strapping System

by Valvan Baling Systems NV     based in Menen, BELGIUM

The automatic strapping system exists of a driven guiding system with a cradle on both sides. The one cradle contains the strapping head, the other the C-chute. The strap is welded by means of friction. Strap size up to 19 mm. The number of straps can be chosen by the customer.

HSM - Model HL 4010 - Horizontal Baling Press

by HSM GmbH Co. KG     based in Frickingen, GERMANY

The HSM HL 4010 horizontal baler has been designed with an operating concept and technical features in mind to make it the optimum machine for food retailers. The baler can be fed continuously and with ease via a lifting and tilting device which delivers cardboard from the waste container directly into the press chamber. A hydraulic pre-compactor ...

BRT - Model PERF-O-MAT - Perforator for PET Bottles and Plastic Containers

by BRT Recycling Technologie GmbH     based in Ibbenburen, GERMANY

Perforating of PET bottles and other receptacles makes storing and processing of plastic containers much easier. Even large volume or filled bottles or cans are perforated by almost 100%. During perforation, the plastic containers are additionally flattened. A flat bottle can not roll and is much better to handle.

Container Presses - RC 1100

by Strautmann Umwelttechnik GmbH     based in Glandorf, GERMANY

The container press RC 1100 compacts waste direct into existing 1.100l container. The container are fixe by sidewise arms for a high stability and safety. There is no ground contact of the container during the press process.

Ludden & Mennekes - Model AS / AS-G Type - Multibucket Systems

by Ludden & Mennekes Entsorgungs-Systeme GmbH     based in Meppen, GERMANY

Self-pressing containers with a hinged flap valve, CE mark and conformity declaration, welded steel structure, designed for continuous charging. The plunger is restrictedly guided in the middle of squares in polyamide rails.

Ludden & Mennekes - Model R / GR Type - Roll-off Multibuckets

by Ludden & Mennekes Entsorgungs-Systeme GmbH     based in Meppen, GERMANY

Self-pressing containers with a door or a hinged flap for roll-off or slide-off multibucket trucks according to DIN 30 722 are delivered with a CE mark and conformity declaration. Their special welded steel structure is designed for continuous charging.

Specacards - Model 10mm - Circular Aperture

by Specac Limited     based in Orpington, UNITED KINGDOM

Card mount with 10 mm circular aperture to hold pressed films for FTIR spectroscopic analysis. These cards fit into 3 x 2' sample mount of most spectrometers, and contain a self-sealing adhesive coating to hold the film in place.

Screw Feeding and Press

by Castolin Eutectic     based in St-Sulpice, SWITZERLAND

The screw feeding is used for dewatering, densifying, and conveying the high hydrous paper pulp. The voluminous pulp is conveyed to the worm casing through a cone. The slowly rotating screw feeding takes over the material and pushes it against a conical, perforated strainer. The water is being extracted and the volume is reduced (approx. 1/2). The ...

Model S2-F - Press for Emptying Rigid Containers

by Schwerdtel GmbH     based in Karlsfeld bei München, GERMANY

If you want to feed pasty products from pressure resistant containers. Like e.g. printing inks, sealants and putty from mixing pans, then the press S2-F is the right choice. Your advantage, few parts in contact with the product, which means quicker product change over, less loss of material. High hydraulic pressure guarantees high output at the ...

Need help finding the right suppliers?

Let the XPRTs do the work for you