press containers Equipment in Turkmenistan

44 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Waste Containers ×

  • Keyword: press containers ×

  • Location: Asia & Middle East ×

  • Location: Turkmenistan ×

Avermann - Press Container for Skip

by Avermann Maschinenfabrik GmbH & Co. KG

With our mobile compactors for settler vehicles opt for flexibility. You get the machine with either: oblique or high sidewalls, individual opening options, 4-point locking, Gate valves etc. Individual requirements for the preparation of course we can take into account, such as head or side filling. Even as a ramp-up.

Container Presses - RC 1100

by Strautmann Umwelttechnik GmbH

The container press RC 1100 compacts waste direct into existing 1.100l container. The container are fixe by sidewise arms for a high stability and safety. There is no ground contact of the container during the press process.

Model S2-F - Press for Emptying Rigid Containers

by Schwerdtel GmbH

If you want to feed pasty products from pressure resistant containers. Like e.g. printing inks, sealants and putty from mixing pans, then the press S2-F is the right choice. Your advantage, few parts in contact with the product, which means quicker product change over, less loss of material. High hydraulic pressure guarantees high output at the ...

BRT - Model PERF-O-MAT - Perforator for PET Bottles and Plastic Containers

by BRT Recycling Technologie GmbH

Perforating of PET bottles and other receptacles makes storing and processing of plastic containers much easier. Even large volume or filled bottles or cans are perforated by almost 100%. During perforation, the plastic containers are additionally flattened. A flat bottle can not roll and is much better to handle.

Avermann - Stationary Presses

by Avermann Maschinenfabrik GmbH & Co. KG

Maximum efficiency for large quantities of waste. For compacting large amounts of waste or recyclables often stationary presses are used. The press unit is fixedly mounted on the substrate. A transport container to the press is coupled, in which the material is pressed. Once the transport container is full, it is disconnected, driven to the ...

Screw Feeding and Press

by Castolin Eutectic

The screw feeding is used for dewatering, densifying, and conveying the high hydrous paper pulp. The voluminous pulp is conveyed to the worm casing through a cone. The slowly rotating screw feeding takes over the material and pushes it against a conical, perforated strainer. The water is being extracted and the volume is reduced (approx. 1/2). The ...

HSM - Model HL 4010 - Horizontal Baling Press

by HSM GmbH Co. KG

The HSM HL 4010 horizontal baler has been designed with an operating concept and technical features in mind to make it the optimum machine for food retailers. The baler can be fed continuously and with ease via a lifting and tilting device which delivers cardboard from the waste container directly into the press chamber. A hydraulic pre-compactor ...

WATROMAT - Container Sludge Dryer

by Watropur AG

WATROMAT container sludge dryer reduces the volume and weight of filter cake sludge semi-continuously with dried air in big skips or hook lift containers. Sludge drying with WATROMAT container sludge dryer suits for large plate and frame filter presses. The filter cake sludge fall into WATROMAT drying skips or WATROMAT hook lift drying containers ...

Tin Presses - DP 20

by Strautmann Umwelttechnik GmbH

The Strautmann tin press DP 20 compacts cans, buckets and container up to 20l. The disgn is very compact and applicable for installtion in kitchen. Easy and safety handling.

Enerpat - Model SMB-T200L - Scrap metal press


ApplicationsCar Body Pieces  Stainless Scrap  Tin CansMixed Light Scrap Metals   Scrap Aluminum Window Scrap Steel WireScrap Copper Wire Steel Sheets Steel Roof Steel ShavingsShred Scrap Steel Non Ferrous MetalNo Model T200L1 Pressing Force (Kn) 20002 Bale weight (Kgs) 120~2203 Bale size (mm) 400*4004 Throughput ...

Need help finding the right suppliers?

Let the XPRTs do the work for you