Waste Containers Equipment in Slovakia

612 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Waste Containers ×

  • Location: Europe ×

  • Location: Slovakia ×


EcoNord - RHEADNN/140 - Electric Double Chair Bin Lift Isbjörn Automatic

by EcoNord Ltd

Easy fitting on any standard rear end loaded RCV. It can be easily fitted to both new and older vehicles with minor modification. A standard DIN frame is required. ISBJÖRN is connected to the 24 volt DC supply from the batteries on the vehicle, through a Power Inverter to provide the 230 AC voltage required to operate the Bin Lift.


OZONATOR - NG-3000 - Medical and Bio-Hazard Waste Treatment Technology

by OZONATOR Industries Limited

The OZONATOR is the complete solution to your bio-hazardous waste needs. With zero emissions, ease of operation, quick cycle time and low operating costs the OZONATOR is not only a better solution but also a more cost-effective solution. The functional part of this system is a combined process that loads un-segregated, bio-hazardous waste directly ...


Type N - Self-Compacting Waste Container

by Atelier Janssen Kaulille (AJK) Belgium N.V.

The type N self-compacting waste container is suitable for medium-sized residual waste and recyclable material. Several options are possible depending on the material to be compacted and the situation on site. The installation is equipped with a stamping press.

Mettler Toledo - Pipette Calibration Workstation

by Mettler - Toledo Int. Inc

Faster and more cost efficient calibration of your single- and multi-channel pipettes with dedicated solutions from METTLER TOLEDO.

Contaminant Detection

by Mettler - Toledo Int. Inc

It is important to consider the type of likely contaminants, characteristics of the packaging used and the critical control points within production and packaging process to select the most appropriate contamination detection technology.

MGB 60, 80 l - Waste Bin

by Paul Craemer GmbH

Characteristics- MGB wheelie bins made of high-quality high-density polyethylene- Manufactured by compact injection moulding- MGB wheelie bins according to EN 840- Available in a variety of colours and combinations- Compliant with noise reduction regulationsDescription- MGB wheelie bin corresponds to: EN 840, RAL-GZ951/1, Directive 2000/14/EG- ...

Kliko - Wheelie bins

by Paul Craemer GmbH

KLIKO – The all purpose range of waste bins- Practice-oriented developments and product tests- A complete range of wheelie bins with a European focus- Professional service up to the delivery to households- Individual iconography, markings and sequential numbers- 2 or 4 wheeled bins KLIKO – certified quality- KLIKO stands for durability and ...

MGBplus 660, 770 l - Wheeled Bins

by Paul Craemer GmbH

Characteristics- High-quality high-density HDPE- Rugged, robust design and construction- Compliant with EN 840Description- Waste container MGBplus corresponds to: EN 840, RAL-GZ951/1, Directive 2000/14/EG- Travelling gear: Wheel Ø 200 mm, rubber-tired wheels, 4 guide castors, 2 wheel stops or central brake- Lid: Flat lid, plastic- Receiver: DIN ...

MGB 1100 l - Waste Container

by Paul Craemer GmbH

Characteristics- High-quality high-density HDPE- Rugged, robust design and construction- Compliant with EN 840- Lid-in-lid solutionDescription- Waste container MGB corresponds to: EN 840, RAL-GZ951/1, Directive 2000/14/EG- Travelling gear: Wheel Ø 200 mm, rubber-tired wheels- Castors: 4 guide castors, 2 wheel stops or central brake- Lid: Flat lid ...

ANDRITZ - SGS - Fluid Bed Spray Granulation

by ANDRITZ Separation - a division of the Andritz Group

The spray granulation process converts a water-containing solution, paste or suspension or a melt into a granule. The granulation and the drying processes take place at the same time. Any kind of crystallization and mechanical dewatering equipment can be replaced by an SGS type fluid bed. The final product granules are dust-free and easy to ...

Need help finding the right suppliers?

Let the XPRTs do the work for you