Waste Containers Equipment in Tonga

377 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Waste Containers ×

  • Location: Australasia ×

  • Location: Tonga ×


EcoNord - RHEADNN/140 - Electric Double Chair Bin Lift Isbjörn Automatic

by EcoNord Ltd

Easy fitting on any standard rear end loaded RCV. It can be easily fitted to both new and older vehicles with minor modification. A standard DIN frame is required. ISBJÖRN is connected to the 24 volt DC supply from the batteries on the vehicle, through a Power Inverter to provide the 230 AC voltage required to operate the Bin Lift.


BRT - PERF-O-MAT - Perforator for PET Bottles and Plastic Containers

by BRT Recycling Technologie GmbH

Perforating of PET bottles and other receptacles makes storing and processing of plastic containers much easier. Even large volume or filled bottles or cans are perforated by almost 100%. During perforation, the plastic containers are additionally flattened. A flat bottle can not roll and is much better to handle.


OZONATOR - NG-3000 - Medical and Bio-Hazard Waste Treatment Technology

by OZONATOR Industries Limited

The OZONATOR is the complete solution to your bio-hazardous waste needs. With zero emissions, ease of operation, quick cycle time and low operating costs the OZONATOR is not only a better solution but also a more cost-effective solution. The functional part of this system is a combined process that loads un-segregated, bio-hazardous waste directly ...

Contaminant Detection

by Mettler - Toledo Int. Inc

It is important to consider the type of likely contaminants, characteristics of the packaging used and the critical control points within production and packaging process to select the most appropriate contamination detection technology.

Mettler Toledo - Pipette Calibration Workstation

by Mettler - Toledo Int. Inc

Faster and more cost efficient calibration of your single- and multi-channel pipettes with dedicated solutions from METTLER TOLEDO.

Shafted Grit Screw Classifier

by WesTech Engineering, Inc.

The Shafted Grit Screw Classifier is a grit conveying and dewatering unit which typically receives grit slurry from a Vortex Grit Separator, an Aerated Grit Chamber, or a Grit Collector. The Shafted Grit Screw Classifier settling tank is designed to effectively separate and settle the grit from the water.

Gritt Mitt - Grit Classifier

by WesTech Engineering, Inc.

The Gritt Mitt™ Classifier is a grit conveying and dewatering unit which typically receives a grit slurry from either a Vortex Grit Separator or an Aerated Grit Chamber. The Gritt Mitt™ settling tank is designed to effectively separate and settle the grit from the water. As the grit is conveyed out of the settling tank it is lightly ...

BRT - BAL-O-MAT - Bale Breaker

by BRT Recycling Technologie GmbH

The BAL-O-MAT Bale Breaker serves for unraveling of press bales from PET-bottles, waste paper, residual waste and other materials. The loosened up material is presented in a metered condition to the subsequent processes. The material degree of dispersion can be adjusted for ensuring optimal processing conditions.

Jones+Attwood Loflow and Washflow - Screening System

by Ovivo (Formerly Eimco Water Technologies)

The Jones+Attwood Lo-Flow screening system designed specifically for the smaller works where flow rates will fall into the range of zero to 120 l/s. The Jones+Attwood Lo-Flow screening arrangement offers 2 to 6mm diameter perforated screen panels, on-board screw compaction and in-flow/in-channel screenings washing. This screen configuration is a ...

FlooBelt - Belt Filter Press For Water And Wastewater Sludges

by Ovivo (Formerly Eimco Water Technologies)

Ovivo’s FlooBelt belt filter press is technology used for the dewatering of all kinds of water and wastewater sludges. The FlooBelt belt filter press is proven technology with extensive number of deliveries.

Need help finding the right suppliers?

Let the XPRTs do the work for you