industrial cleaning Equipment in Croatia

Serving Croatia | Office in CroatiaNear Croatia
91 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Waste Management ×

  • Keyword: industrial cleaning ×

  • Location: Europe ×

  • Location: Croatia ×

VacuDry - Process and Design of Industrial Waste Cleaning Systems

by econ industries GmbH     based in Starnberg, GERMANY

At the core of the econ VacuDry process is a specially designed dryer chamber which uses heat and controlled vacuum to evaporate volatile contaminants. The batch-wise working indirectly heated thermal desorption process treats solids contaminated with mercury, hydrocarbons, solvents and other hazardous substances at temperatures above their ...

KASAG Clean - Cleanable Stainless Steel Heat Exchanger

by KASAG LANGNAU AG     based in Langnau i.E., SWITZERLAND

The sewage flows continuously or in surges and if needed through a coarse filter into a container with a defined retention volume and is used as a source of energy. A heat exchanger with an automatic cleaning feature is installed in the container. Heat is extracted or carried away in the operation of the device.

KAHL - Waste Tyre Recycling Plants

by Amandus Kahl GmbH & Co. KG     based in Reinbek, GERMANY

COST-EFFICIENT AND FLEXIBLE Large quantities of waste tyres are produced worldwide. KAHL have developed a particularly cost-efficient process for the production of a metal- and fabric-free granulate.

OXY-THERM - Natural Gas Burners

by Maxon Corporation- a Honeywell Company     based in Muncie, INDIANA (USA)

OXY-THERM Natural Gas Burners eliminate the need for costly combustion air pre-heaters, regenerators or recuperators and provide clean combustion with low NOx levels. OXY-THERM Gas Burners use oxygen for the combustion reaction, removing atmospheric nitrogen as a source for NOx creation. OXY-THERM burns any gaseous fuel or oil including gases with ...

OXY-THERM Gas or Oil Burners

by Maxon Corporation- a Honeywell Company     based in Muncie, INDIANA (USA)

OXY-THERM Oil Fired Burners remove the need for expensive combustion air pre-heaters, regenerators or recuperators and provide clean combustion with low NOx levels. OXY-THERM Oil Fired Burners use oxygen for the combustion reaction, which removes atmospheric nitrogen as a source for NOx creation. OXY-THERM will burn any gaseous fuel or oil ...

OPTIspin - Model SB20 - Spin Coating or Cleaning System

by ATMvision AG     based in Singen, GERMANY

The future technology in the semi conductor industry and production-Spinner module for coating and cleaning within process.

Drill Cuttings Cleaning

by Surface Active Solutions Ltd     based in Livingston, UNITED KINGDOM

The SAS microemulsion products provide the capability to treat drill cuttings onsite using a simple wash and separate process. This process uses standard oilfield drilling fluids & waste handling equipment in order to achieve an oil on dry cuttings level of less than 1% by weight.

Model Canalmaster - Combined Suction And Cleaning Vehicles

by Müller Umwelttechnik GmbH & Co KG     based in Schieder-Schwalenberg, GERMANY

Versatility in cleaning, collection, and transport of many sided disposal operations. The use of combination suction flushing vehicles in sewer cleaning operations is on the increase. These vehicles can also be used when when required to transport controlled substances, as well as liquid waste materials which require monitoring to GGVS/ADR ...

Planotex - Self Cleaning Rake Screen Rotating Brush

by Planotex GmbH     based in Neuried, GERMANY

Slotwidth: 1 – 15 mm. Capacity: up to 3600 m3/h. Material: stainless steel with plastic rake screen. Surface of the screen: rake shaped elements. Cleaning: At the deflection points a mechanical self cleaning effect is achieved by the meshing of the rake elements. Additional a rotating brush or a spraying device is installed in the upper ...

Commercial and Industrial waste (C&I)

by GEMS Waste Technology BV, IQS papersorting & EGRS     based in Vorden, NETHERLANDS

Gems Waste technology is manufacturer of a large range of products for the separation and cleaning of Commercial and Industrial waste into re usable products i.e. hard plastics, plastic foils, wood, non ferrous, paper, cardboard, etc. Our products are easy to integrate in existing processing to increase your efficiency. Besides our modular ...

Need help finding the right suppliers?

Let the XPRTs do the work for you