industrial cleaning Equipment in Utah

Serving Utah | Near Utah
85 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Waste Management ×

  • Keyword: industrial cleaning ×

  • Location: USA ×

  • Location: Utah ×

VacuDry - Process and Design of Industrial Waste Cleaning Systems

by econ industries GmbH     based in Starnberg, GERMANY

At the core of the econ VacuDry process is a specially designed dryer chamber which uses heat and controlled vacuum to evaporate volatile contaminants. The batch-wise working indirectly heated thermal desorption process treats solids contaminated with mercury, hydrocarbons, solvents and other hazardous substances at temperatures above their ...

KASAG Clean - Cleanable Stainless Steel Heat Exchanger

by KASAG LANGNAU AG     based in Langnau i.E., SWITZERLAND

The sewage flows continuously or in surges and if needed through a coarse filter into a container with a defined retention volume and is used as a source of energy. A heat exchanger with an automatic cleaning feature is installed in the container. Heat is extracted or carried away in the operation of the device.

EST Steam Heaters

by Severn Trent Services, Inc     based in Fort Washington, PENNSYLVANIA (USA)

EST™ steam heaters can be used in any process that requires heating with steam. Severn Trent Services offers a variety of proven steam heater designs incorporating both direct contact units as well as shell & tube designs. Direct contact designs include tank steam heaters, used to inject steam directly into process vessels in batch applications. ...

Clean Burn - Model CB-2500 - Waste Oil Furnace

by Clean Burn, LLC     based in Lancaster, PENNSYLVANIA (USA)

The larger of the two Clean Burn low profile models, the Model CB-2500 waste oil furnace produces approximately 250,000 BTU/hr and is extremely popular at facilities such as 2 to 4 bay auto repair and truck service shops. The CB-2500 is highly versatile and reliable and can be easily ceiling mounted or used in conjunction with a Clean Burn ...

Clean Burn - Model 1750 - Waste Oil Furnace

by Clean Burn, LLC     based in Lancaster, PENNSYLVANIA (USA)

The Clean Burn Model CB-1750 produces approximately 175,000 BTU/hr. and is the smallest of the low profile designs, making it ideal for numerous applications and convenient installations. As a broad guideline, the Model CB-1750 is suitable for facilities generating smaller quantities of waste oil annually.

Model 107 Series - Municipal Style Hydraulic Pipeline Flushers Sizes - 3 to 12

by Petersen Products Company     based in Fredonia, WISCONSIN (USA)

Petersen Drain Flushers open clogged drains with powerful jet action and high flow rate. Easy to install even around bends and elbows. Much greater flow rate than rubber bulb-type flushers that require much of the pressure just to expand the rubber. DrainJet™ Hydraulic Drain Flusher puts all the water flow and pressure to work. The 100 to ...

OXY-THERM - Natural Gas Burners

by Maxon Corporation- a Honeywell Company     based in Muncie, INDIANA (USA)

OXY-THERM Natural Gas Burners eliminate the need for costly combustion air pre-heaters, regenerators or recuperators and provide clean combustion with low NOx levels. OXY-THERM Gas Burners use oxygen for the combustion reaction, removing atmospheric nitrogen as a source for NOx creation. OXY-THERM burns any gaseous fuel or oil including gases with ...

OXY-THERM Gas or Oil Burners

by Maxon Corporation- a Honeywell Company     based in Muncie, INDIANA (USA)

OXY-THERM Oil Fired Burners remove the need for expensive combustion air pre-heaters, regenerators or recuperators and provide clean combustion with low NOx levels. OXY-THERM Oil Fired Burners use oxygen for the combustion reaction, which removes atmospheric nitrogen as a source for NOx creation. OXY-THERM will burn any gaseous fuel or oil ...

OPTIspin - Model SB20 - Spin Coating or Cleaning System

by ATMvision AG     based in Singen, GERMANY

The future technology in the semi conductor industry and production-Spinner module for coating and cleaning within process.

Drill Cuttings Cleaning

by Surface Active Solutions Ltd     based in Livingston, UNITED KINGDOM

The SAS microemulsion products provide the capability to treat drill cuttings onsite using a simple wash and separate process. This process uses standard oilfield drilling fluids & waste handling equipment in order to achieve an oil on dry cuttings level of less than 1% by weight.

Need help finding the right suppliers?

Let the XPRTs do the work for you