liquid waste Equipment in Netherlands

Serving Netherlands | Office in NetherlandsNear Netherlands
93 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Waste Management ×

  • Keyword: liquid waste ×

  • Location: Europe ×

  • Location: Netherlands ×

Model MT-IBA - Liquid Filtration

by V&T Group BV     based in Numansdorp, NETHERLANDS

Through inlet dirty water flows into the filterhousing. Normal pollution rates are 1-10 mg/l or 1-5 NTU. The filterelements on the rolls ( MT-IBA-2 : 2 rolls, MT-IBA-4 : 4 rolls) filter down to 0,5 micron depending on the fluxrate. For waste water treatment at a flux of 200l/m2/h this results in a filtration level of 0,5 micron and for drinking ...

Model ADR ATEX Level 1 - Combined Hasardous Liquid Waste Pumping and Transport Vehicle

by Hydrovide SA     based in LEZIGNE, FRANCE

Equipement for the pumping and the transport of hazardous with flash point below 60°C. ADR ATEX EQUIPEMENT (LEVEL 1) Tank approval for the carriage of hazardous wastes of classes 3, 4-1, 5-1, 8-2, 8 and 9. Tank classification code L4AH + S4AH (ADR 2007 chapter 6-10). In conformity with tha ATEX directive 94/9. Possibility in the class 3 : ...

Model ADR ATEX Level 2 - Combined Hasardous Liquid Waste Pumping and Transport Vehicle

by Hydrovide SA     based in LEZIGNE, FRANCE

Tank approval code L4AH + S4AH according to ADR 2007, chapter 6-10 refering to the carriage of hazardous wastes belonging to the classes 3,4-1, 5-1, 6-1, 6-2, 8 and 9.The tank approval is delivered by INERIS for the first standard unit according to the annex IX of the directive 94/9/CE, the following units being approved under production of the ...

Tecam Group - Incinerator System for Waste Management (Hazardous, Solid & Liquid, NORM, Sludge, etc.)

by Tecam Group     based in Llinars del Vallès, SPAIN

Incinerators for Hazardous Waste, Solid Waste, Liquid Waste, NORM derived from industrial processes. Waste valorisation is a common and necessary practice to treat, recycle and give a new value to waste coming from human and industrial activity. Incineration is a type of valorisation that offers safe results and advantages, which make it ideal for ...

Oil and Gas Drilling Waste Management Equipment and Services

by Solids Control Services     based in Aberdeen, UNITED KINGDOM

SCS equipment and services for drilling waste management are offered on a contract or rental basis for oil and gas drilling projects.

Industrial Sludge/Effluent Waste Treatment Equipment and Systems

by Solids Control Services     based in Aberdeen, UNITED KINGDOM

SCS offer equipment and services for industrial sludge and effluent waste treatments, on a contract or sale basis, for industrial and environmental waste management projects.

Erdwich - Systems for Special Waste Recycling

by Erdwich Zerkleinerungssysteme GmbH     based in Kaufering, GERMANY

High-efficiency solutions for the shredding and sorting of special waste, bulky items and industrial waste. The shredding and sorting of rubbish and refuse is one of the key challenges within the waste management cycle. And with ERDWICH systems, there is a perfect set of solutions for meeting any of these application scenarios: Household rubbish, ...

Front Loader

by Spyros Houtris & Sons Ltd (Lefkonitziatis)     based in Agglisides, CYPRUS

The Front Loader refuse collection vehicle is equipped with automated forks on the front which the driver carefully aligns with sleeves on the waste container using a joystick or a set of levers.

Model D-020 - Combination Air Valve for Wastewater

by A.R.I. Flow Control Accessories     based in ISRAEL, ISRAEL

The D-020 Combination Air Valve combines an air & vacuum orifice and an air release orifice in a single body. The valve is specially designed to operate with liquids carrying solid particles such as wastewater and effluents. The combination air valve discharges air (gases) during the filling or charging of the system, admits air into the ...

Superheated Water System

by TVT Termoventiltecnica S.r.l.     based in Ponzano Veneto, ITALY

Heat regeneration plant from water superheating with pressure of exhausted gases from the co-generation groups of dump Biogases. The regenerated heat is used for the plant of dump liquid treatment thereby reducing the operating costs.

Need help finding the right suppliers?

Let the XPRTs do the work for you