waste regulations Equipment in Denmark

Serving Denmark | Office in DenmarkNear Denmark
64 Results found
  • Category: Waste & Recycling ×

  • Subcategory: Waste Management ×

  • Keyword: waste regulations ×

  • Location: Europe ×

  • Location: Denmark ×

Infectious Hospital Waste

by econ industries GmbH     based in Starnberg, GERMANY

Process and design: In earlier times, incineration was always considered to be the safest and most economic way of treating and disposing of infectious hospital waste. However, results of a US-based study show that one of the prime reasons for the increase in Dioxin-based pollution world-wide was in fact this incineration process. As a result of ...

Model Medium 50/60 - Refuse Collection Vehicles

by PB Environnement España     based in Lambesc, FRANCE

5 or 6 m3 body. Adapted to short wheelbase and narrow chassis. 35mm thick aluminium alloy body, unalterable, with a double panel design which guarantees that it will always keep its shape. Smooth panels and waterproof base. Body split in 2 compartments with the possibility to have 50/50 split; 1/3 - 2/3 split; tailor made split. Compaction by a ...

ARTechnic - Model PBPe120 - Waste Balers

by ARTechnic     based in Bielsko-Bial,a, POLAND

The moving of the pressing plate is kept extremely rigid and straight. The hydraulic cylinder does not take the bending forces from the pressing plate, which could lead to its damage. These forces are taken over by special plastic guides which are tailored to the corners of the chamber. The guides are made from specially chosen plastic, which is ...

ARTechnic - Model PBPe500-o - Waste Balers

by ARTechnic     based in Bielsko-Bial,a, POLAND

The moving of the pressing plate is kept extremely rigid and straight. The hydraulic cylinder does not take the bending forces from the pressing plate, which could lead to its damage. These forces are taken over by special plastic guides which are tailored to the corners of the chamber. The guides are made from specially chosen plastic, which is ...

ARTechnic - Model PBs620 - Baler for Hard Plastic

by ARTechnic     based in Bielsko-Bial,a, POLAND

The moving of the pressing plate is kept extremely rigid and straight. The hydraulic cylinder does not take the bending forces from the pressing plate, which could lead to its damage. These forces are taken over by special plastic guides which are tailored to the corners of the chamber. The guides are made from specially chosen plastic, which is ...

Model MEDIUM-G2 - Refuse Collection Vehicles

by PB Environnement España     based in Lambesc, FRANCE

Compact vehicle (narrow track – short wheelbase). Volume 6 or 7 m3. Full aluminium body 30 mm dual wall design, Full aluminium compaction blade on sliding trolley for 100% body loading. Bin lift equipped with assisted bin catching. Two 2-wheel bins or one 4-wheel bin emptying. 12 seconds cycle. Standard lifting power 450 Kg. Collection of ...

Sterilwave - Model 250 - Medical Waste Disposal Equipment

by Bertin Technologies - Laboratory Equipment     based in Montigny - Le - Bretonneux, FRANCE

Sterilwave, blending and disinfection by microwave. Sterilwave, an innovative onsite solution for bio hazardous waste management! Eco-friendly and easy-to-use, the Sterilwave system is installed directly in healthcare units. Cost-effective solution, this fully automated solution shreds and sterilize by microwave any hazardous medical waste into ...

Sterilwave - Model 440 - Medical Waste Disposal Equipment

by Bertin Technologies - Laboratory Equipment     based in Montigny - Le - Bretonneux, FRANCE

Sterilwave, blending and disinfection by microwave. Sterilwave, an innovative onsite solution for bio hazardous waste management! Eco-friendly and easy-to-use, the Sterilwave system is installed directly in healthcare units. Cost-effective solution, this fully automated solution shreds and sterilize by microwave any hazardous medical waste into ...

AppliTek - On-line Monitoring of Recycle / Waste Water

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

Water quality is of particular concern for the chemical and physical properties of the polymers made. On-line analyzers can be applied in order to minimize capital investment and operating costs towards maximum reuse of process water. AppliTek's large portfolio of on-line analyzers enables you to monitor precisely all water matrices, including ...

Aerosol - Shredding Systems

by Meltog A Division of MMco. Limited     based in Leeds, UNITED KINGDOM

Meltog offers a number of pre-existing solutions for the safe destruction, management and sorting of aerosol cans for either indoor or outdoor operation and for either ODS or non ODS applications. All systems comply with ATEX regulations and they can be additionally adapted to comply with localised, specific environmental requirements or site ...

Need help finding the right suppliers?

Let the XPRTs do the work for you