activated carbon adsorption Equipment in Tunisia

Serving Tunisia | Office in TunisiaNear Tunisia
106 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Activated Carbon Treatment ×

  • Keyword: activated carbon adsorption ×

  • Location: Africa ×

  • Location: Tunisia ×

JFE - Exhaust Gas Activated Carbon Adsorption Systems

by JFE Engineering America Inc.     based in Long Beach, CALIFORNIA (USA)

JFE Gas Clean DX system– compact dioxin removal system capable of reaching levels of 0.01 ng-TEQ/m3N. JFE Gas Clean DX, developed by JFE Engineering, is a new dioxin-removal system for exhaust gas. High-performance activated carbon was developed exclusively for the system. Packaged cartridges with a unique structure allowing the system to ...

Carbon Filters

by Clarke Energy     based in Liverpool, UNITED KINGDOM

A carbon filter is an in-line container filled with activated carbon granules. Activated carbon has a high propensity for the adsorption of fuel gas contaminants. Carbon filters are often a necessity for tricky gases such as landfill gas. The carbon needs to be replaced periodically depending upon the level of contamination in the fuel gas.

Model 12 x 40 - Acid Washed Granular Activated Carbon

by Encotech, Inc. / Carbon Service and Equipment Company a Division of Encotech, Inc.     based in Eighty Four, PENNSYLVANIA (USA)

Carbon Service and Equipment Company's virgin acid washed granular activated carbon is made from selected grades of bituminous coal combined with suitable binders to give superior hardness and long life. With a low acid soluble iron content, it is designed for the purification and decoloiization of many aqueous and organic liquids. Produced by ...

Model 4mm - Pellet Activated Carbon

by Encotech, Inc. / Carbon Service and Equipment Company a Division of Encotech, Inc.     based in Eighty Four, PENNSYLVANIA (USA)

Carbon Service and Equipment Company's 4 nun pellet activated carbon is designed for air and gas purification applications. 4 nun pellet is produced by high temperature steam activation of coal which produces a porous material with a high surface area allowing it to adsorb a wide range of organic compounds. Utilizing coal as a raw material also ...

Calgon Carbon - Model CR5000 - Granular Activated Carbon Adsorber Vessel

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

The CR5000 carbon adsorber is a pressure vessel designed to treat water or other liquids using granular activated carbon (GAC). The CR adsorber contains all of the operating elements required for utilization of granular activated carbon in water treatment, including a corrosion resistant underdrain for effective treated water collection and a ...

Containment Systems

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

Steel adsorbers designed similarly to a roll-off box used to treat flows up to 10,000 cfm.

HIGH-FLOW HF Series

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

Polyethylene and polypropylene adsorbers. Available in 4 sizes for flows up to 1,500 cfm. Can be supplied as a stand-alone unit or with appropriate fans.

TITAN Series

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

Polypropylene adsorbers with fans and flow control dampers. Available in 4 sizes for flows up to 30,000 cfm.

Calgon Carbon - Model LM Series - Two Stage Modular Adsorption System

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

The Calgon Carbon LM Adsorber Systems are designed for removal of dissolved organic compounds from water or other liquids using granular activated carbon. The two vessel system design allows for flexibility in operation to meet the requirements of the treatment application.

Calgon Carbon - Model 8 - Modular Carbon Adsorption System

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

The Calgon Carbon Model 8 is an adsorption system designed for the removal of dissolved organic compounds from water or other liquids using granular activated carbon. The modular design concept allows for selection of options or alternate materials to best meet the requirements of the site and treatment application.

Related Terms for activated carbon adsorption

Need help finding the right suppliers?

Let the XPRTs do the work for you