advanced oxidation processes Equipment in China

Serving China | Office in ChinaNear China
53 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Advanced Water Treatment ×

  • Keyword: advanced oxidation processes ×

  • Location: Asia & Middle East ×

  • Location: China ×

Advanced Oxidation Process (AOP)

by Simran Canada - Water Treatment Co     based in Surrey, BRITISH COLUMBIA (CANADA)

Ozone has been used in waste water treatment for limited applications namely, color removal, BOD reduction, COD reduction etc but the applications were limited because Ozone alone is not sufficient to control all parameters of wastewater treatment. Moreover, the amount of ozone required & residence time is very high making it un-economical to ...

Photo-Cat - Model AOP Plus - Advanced Oxidation Processes

by Purifics ES Inc.     based in London, ONTARIO (CANADA)

Photo-Cat is a photocatalytic membrane system that destroys organic pollutants when they are mixed with the titanium dioxide (TiO2) slurry, and activated by full spectrum UV light. The patented continuous TiO2 separation process allows the catalyst to be completely recaptured and reintroduced into the inlet stream.Photo-Cat is typically used in ...

Anguil - Model RCO - Regenerative Catalytic Oxidizer

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Anguil's Regenerative Catalytic Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions that are often discharged from industrial processes. The RCO achieves emission destruction through the process of thermal and catalytic oxidation, converting the pollutants to carbon dioxide and water vapor ...

Anguil - Model RTO - Regenerative Thermal Oxidizer

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

The Regenerative Thermal Oxidizer (RTO) destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions that are often discharged from industrial or manufacturing processes. Anguil RTOs achieve emission destruction through the process of high temperature thermal oxidation, using the proper mix of temperature, ...

Anguil - Model TRO - Thermal Recuperative Oxidizer

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

The Anguil Thermal Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions that are often discharged from various industrial processes. The air pollution control device uses the proper mix of temperature, residence time, turbulence and oxygen to achieve destruction or thermal ...

Anguil - Model Catox - Catalytic Recuperative Oxidizer

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

The Anguil Catalytic Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions that are often discharged from industrial processes.  The air pollution control device achieves emission destruction at significantly lower temperatures than thermal oxidation through the use of ...

Anguil - Rotor Concentrator with Recuperative Oxidizer

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Typical air pollution control projects focus on the capture mechanism and a destruction device. With regulations driving towards higher capture efficiencies, combustion devices must treat larger volumes of air with lower concentration of pollutants. The Anguil concentrator is an adsorption system designed to concentrate large volume, low ...

USO - Model 3 - Advanced Oxidation Process for Disinfection and Treatment of Wastewater

by Ultrasonic Systems GmbH (USS)     based in Thierhaupten, GERMANY

The USO 3 represents a completely new trendsetting technology. It utilizes cavitation paired with the power of an Advanced Oxidation Process (AOP). The cavitation generated through the use of ultrasound causes extremely high local pressures and temperatures without increasing the liquid temperature above ambient level. These local effects result ...

EOT Advanced Oxidation Process Mobile Unit - 10 Gallon Per Minute

by Envirozone Technologies     based in Walnut Creek, CALIFORNIA (USA)

Dimensions: H 11' x W 8'4' x L 31', Gross Weight Empty: 12,000 lbs, Flow Rate: 3 to 10 gallons per minute, Ozone Generator: 6 pounds per day, Ultraviolet: 20 gallons per minute, Carbon Filters: 20 cubic feet of carbon, Solids & Oil Separator: stainless steel, Ozone Contact Tower: polypropylene, Ozone/Oxygen Mixing Chamber: stainless steel, ...

EOT Advanced Oxidation Process Mobile Unit - 1 Gallon Per Minute

by Envirozone Technologies     based in Walnut Creek, CALIFORNIA (USA)

Dimensions: H 7'4' x W 6'6' x L 12'6', Gross Weight Empty: 3,500 lbs, Flow Rate: 0.5 to 2 gallons per minute, Ozone Generator: 1 pound per day, Ultraviolet: 10 gallons per minute, Carbon Filters: 3 cubic feet of carbon, Solids & Oil Separator: stainless steel, Ozone Contact Tower: stainless steel, Ozone/Oxygen Mixing Chamber: stainless steel, ...

Related Terms for advanced oxidation processes

Need help finding the right suppliers?

Let the XPRTs do the work for you