biological oxygen demand Equipment in Lebanon

Serving Lebanon | Near Lebanon
159 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Biological Water Treatment ×

  • Keyword: biological oxygen demand ×

  • Location: Asia & Middle East ×

  • Location: Lebanon ×

Oxidirect - Model BOD - Measurement System

by Camlab Limited     based in Over, UNITED KINGDOM

The Oxidirect sensor system is a six or twelve sample system that allows precise measurement of BOD based on the manometric principle.

Jenway - BOD Accessories

by Bibby Scientific Limited     based in Stone, UNITED KINGDOM

Biological Oxygen Demand or BOD serves as an indicator of water pollution in water quality management. BOD5 measures the amount of oxygen consumed by aerobic bacteria in the breakdown of organic matter in a sample of water over 5 days in the dark at 20°C. The greater the value, the higher the degree of pollution.

Ovivo - Containerized Membrane Bioreactors (MBR)

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

Designed for rapid deployment, easy maintenance and minimal operator involvement, Ovivo’s Containerized Membrane Bioreactors (MBR) provide wastewater treatment solutions for military field operations, aid relief operations and construction camp use worldwide. The value added benefit; (typically with 50% less tank volume compared to ...

LAR - Model BioMonitor - BOD Analyser

by LAR Process Analysers AG     based in Berlin, GERMANY

Measurement range: 1-200.000 mg/l BOD, 0-100 % Toxicity, Respiration in mg O2/l x min. Response time: 3-4 min. (customizable). High degradation. Sludge activity. Using the plant's own biomass. No memory effects.

BODChek - Portable BOD Detection to Provide Real Time Monitoring of Organic Pollution

by Modern Water - Monitoring Division     based in Cambridge, UNITED KINGDOM

BODChek enables in-situ, real-time, monitoring of Biological Oxygen Demand (BOD) within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units.

Model BD600 - BOD Measurement System

by Camlab Limited     based in Over, UNITED KINGDOM

Accurate, automatic and direct control of your wastewater samples. BOD – biochemical oxygen demand – is an expression for the quantity of oxygen required for biological degradation of organic matter in waste water sample. BOD measurement is therefore used as a basis for the detection of biologically degradable organic matter in water. ...

AppliTek Ra-COMBO - At-Line BOD Analyzer and Toxicity Analyzer

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

The Ra-COMBO is a renowned respirometric at-line analyzer for conducting semi-automated analysis on the biolgical activity of activated sludge. The system basically measures the respiration rate (expressed as mg O2/l.h), one of the most important parameters for the biological activity of activated sludge. The analyzer determines short-term ...

Lovibond Tintometer - BOD OxiDirect

by DelAgua Group     based in Marlborough, UNITED KINGDOM

The Lovibond OxiDirect is a manometric, respirometric BOD measurement system. Manometric respirometers relate oxygen uptake to the change in pressure caused by oxygen consumption while maintaining a constant volume. Thanks to the modern integral pressure sensors, it is no longer necessary to use mercury for pressure measurements.Data is stored in ...

OxiTop Box – Thermostat Box With Forced Air Circulation for 20 (±0,5 °C)

by WTW GmbH - a xylem brand     based in Weilheim, GERMANY

OxiTop® Box with hinged, non-corrosive, clear-view cover accommodates a maximum of either 12 OxiTop® simultaneous measurements or 20 Karlsruhe bottles. The chamber is equipped with a connection for an IS 6 or IS 12 stirrer. A special compartment is provided for 6 methylene blue samples. A cross ventilation fan ensures uniform temperature ...

Model OC 100/OC 110 BOD - Self-check Measurement Controller

by WTW GmbH - a xylem brand     based in Weilheim, GERMANY

Features: Simultaneous sample management with option of grouping up to 100 OxiTop®-C measuring heads. Data call-up of one parallel sample with statistical evaluation and as individual data. Automatic calculation and graphical display of BOD value. Data transfer even through glass doors. Protocol and documentation of data via Achat OC ...

Need help finding the right suppliers?

Let the XPRTs do the work for you