chemical oxygen demand tests Equipment

11 Results found
  • Category: Water & Wastewater ×

  • Subcategory: BOD & COD ×

  • Keyword: chemical oxygen demand tests ×

The First COD Cell Tests with Unlimited Chloride Tolerance

by Merck Millipore     based in Darmstadt, GERMANY

The chloride dilemma: COD (chemical oxygen demand) measurements are regularly performed to test water for pollutants. But as many analysts know, the task is particularly difficult when the water sample contains very high chloride levels, such as with industrial wastewater or seawater. Standard COD tubes cannot be used, as chloride interferes ...

SURCIS - Model BM-EVO - Multifunction Respirometer

by SURCIS, S.L.     based in Barcelona, SPAIN

BM-EVO is an advanced system of respirometry equipped with a programmable settings board for the atomatic control of the temperatura and dissolved oxygen, allowing tests to be adapted to the actual conditions of the process and change them if necessary.

SURCIS - Model BM-Advance - Multipurpose Respirometer

by SURCIS, S.L.     based in Barcelona, SPAIN

Within the BM respirometer series, besides to be equipped with a programable and automatic system for temperature and dissolved oxygen control, it is distinguished from the rest by also being equipped with a programmable system of pH control. Bm-Respirometer Specially Developed For Practical  And Efficient Biological Wastewater Treatment ...

SURCIS - Model BM-T+ - Multi-purpose Respirometer

by SURCIS, S.L.     based in Barcelona, SPAIN

BM-T + is an updated version of the old BM-T where the powerful BM software has been implemented. It is equipped with an external unit for the temperature control and maintains its character of easily transportable through their padded cases. Respirometers are laboratory analyzers specially developed, for practical and efficient biological ...

Tubetests - Model COD - Reagents Including Chemical Oxygen Demand

by Palintest Ltd - a Halma Company     based in Gateshead, UNITED KINGDOM

For ultimate convenience, the Palintest range of Tubetests offers pre-dispensed reagents for minimal handling and ease-of-use. For applications such as Chemical Oxygen Demand (COD), nutrients (ammonia, nitrate and phosphate) and heavy metals (chrome, copper, iron, nickel and zinc) the Tubetests range provides the solution – literally.

Chemical Oxygen Demand (COD) Analysis

by Aqua Diagnostic     based in South Melbourne, AUSTRALIA

Treatment Plant Optimisation With increasing costs for power and effluent discharge, process optimisation through real time, accurate monitoring of COD levels at key points throughout the treatment plant is a necessity. The PeCOD™ COD range of analysers will provide critical monitoring information to optimize secondary treatment aeration ...

CHEMetrics - Model K-7365 - Chemical Oxygen Demand (COD) Dichromate Digestion Vials: 0-1500mg/l, 150 vials

by Galgo (UK) Limited     based in Berkhamsted, UNITED KINGDOM

CHEMetrics Chemical Oxygen Demand (COD) Vials - for instrumental colourimetric analysis. A digestor block and photometer or spectrophotometer are required to perform the test. Both USEPA Approved and Mercury Free versions available. Various ranges and kit sizes available. Please contact us for further information.

Nordic - Model BOD - Incubators for Test Chamber

by Nordic Scientific & Natural Solutions AB     based in Lund, SWEDEN

Construction: This unit has double walled chamber, with glass wool/PUF insulation. Interior made of Stainless Steel & Exterior is either made of Mild Steel finished with powder coating or Stainless Steel. This unit has full-length inner glass door and outside metal door with magnetic gasket and lock. The unit is provided with perforated Stainless ...

OXYMAT - Model 6 - Continuous Gas Analyzers For Oxygen

by Siemens Industry, Inc. - Process Analytics     based in Houston, TEXAS (USA)

Most frequently used for demanding applications, the OXYMAT 6 must meet high standards with regard to reliability and measuring quality. This is guaranteed by modern electronics, ease of operation and a measuring bench that is adapted to the measuring task.

Accu-TEST - Model COD - Testing System

by Bioscience, Inc.     based in Allentown, PENNSYLVANIA (USA)

The EPA-accepted Accu-TEST COD System from Bioscience, Inc., makes determination of chemical oxygen demand (COD) as easy as 1-2-3. With the Accu-TEST COD System, testing is fast, inexpensive and simple. To determine wastewater strength, simply: Add a wastewater sample to a high-quality glass reagent tube. Digest the sample and reagent for two ...

Related Terms for chemical oxygen demand tests

Need help finding the right suppliers?

Let the XPRTs do the work for you