scaling inhibitors Equipment

55 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Chemical Water Treatment ×

  • Keyword: ×

Belclene - Antiscalants

by Polysep Industrial Consultants     based in Putten, NETHERLANDS

BWA's Belclene scale and corrosion inhibitor products have been specifically designed to meet the most demanding needs of our customers - for both technical performance and environmental acceptability. The maleic, phosphinocarboxylic and phosphonocarboxylic acid technology on which BWA products are based has led to additives which out-perform ...

Scale Inhibitors for Water Treatment Chemicals

by Lenntech Water Treatment     based in Delft, NETHERLANDS

Scale is the precipitate that forms on surfaces in contact with water as a result of the precipitation of normally soluble solids that become insoluble as temperature increases. Some examples of scale are calcium carbonate, calcium sulphate, and calcium silicate. Scale inhibitors are surface-active negatively charged polymers. As minerals exceed ...

LMI - Electromagnetic Dosing Pumps

by Milton Roy Europe     based in PONT SAINT PIERRE, FRANCE

The LMI range's electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or ...

scale inhibitor and dispersant HPMA

by Jinan Quicer Technology and Trade Co., Ltd.     based in Jinan, CHINA

Appearance: Clear to umber transparent liquidProperties and usage: HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with ...

scale inhibitor HEDP•Na4

by Jinan Quicer Technology and Trade Co., Ltd.     based in Jinan, CHINA

Appearance: White powder, Colorless to light yellow transparent liquidProperties and usage: HEDP•Na4 is widely used in circulating cool water system, medium and low pressure boiler, oil field water pipelines as scale and corrosion inhibitor in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, ...

AmTreat - Model 2201 - Scale Inhibitor & Dispersant

by AmSolv     based in Waxahachie, TEXAS (USA)

AmTreat 2201 is a highly concentrated liquid scale inhibitor and dispersant. It is designed for use in larger industrial recirculating cooling and boiler water systems, reverse osmosis, or other applications where a highly concentrated scale inhibitor and dispersant is needed. Properly used it will minimize system scale and fouling for increased ...

AmTreat - Model 2215 - Cooling Water Scale Inhibitor

by AmSolv     based in Waxahachie, TEXAS (USA)

AmTreat 2215 is a concentrated liquid scale and corrosion inhibitor. It is designed for use in a wide range of open recirculating cooling water systems where clean, scale and deposit-free surfaces are required for system life and efficiency. AmTreat 2215 accomplishes this with one easy to use product.

Chemical Feed Systems - Calcium Hypochlorite Briquette Feeder

by Lutz-JESCO America Corp.     based in Rochester, NEW YORK (USA)

This highly precise and efficient System uses dry calcium hypochlorite briquettes to prepare and automatically deliver a consistently accurate dose of available chlorine for disinfection. The dry briquettes contain an inhibitor to significantly reduce the potential for carbonate scale.

MROY - Model XA & XB - Motor Driven Dosing Pumps

by Milton Roy Europe     based in PONT SAINT PIERRE, FRANCE

Created in 1959, and enhanced and improved over the years, the mROY is one of the most popular dosing pumps in the world. Its high performance, reliability and durability (service lives in excess of 30 years regularly observed on site) have made it an industry standard.With its flow rate/pressure characteristics and its very compact footprint, the ...

MILROYAL - Motor Driven Dosing Pumps

by Milton Roy Europe     based in PONT SAINT PIERRE, FRANCE

MILROYAL D pumps were specifically developed to produce micro flow rates at medium and very high pressures.Their flow rate/pressure performance, ranging from 0.11 l/h to 345 l/h / 500 bar, means that they can be used for numerous applications with dosing accuracy of ±1%.MILROYAL D pumps are particularly rugged and can operate in the ...

Need help finding the right suppliers?

Let the XPRTs do the work for you