Chemical Water Treatment Equipment in Maryland

Serving Maryland | Office in MarylandNear Maryland
1984 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Chemical Water Treatment ×

  • Location: USA ×

  • Location: Maryland ×

Auto Polymer Dosing

by SPINPRO SPECIALTY SEPARATION SERVICES INC.     based in Bellingham, WASHINGTON (USA)

The Opti-Mizer is a self contained, portable   PLC controlled slurry processing system. The adaptable sensors integrate directly to the dredge/pump pipeline to monitor and treat sludge prior to  the de-watering tubes and/or de-watering devices.  As the slurry passes the floc analyzer, feedback is sent to the polymer dosage ...

Belclene - Antiscalants

by BWA Water Additives     based in Tucker, GEORGIA (US) (USA)

BWA's Belclene scale and corrosion inhibitor products have been specifically designed to meet the most demanding needs of our customers - for both technical performance and environmental acceptability. The maleic, phosphinocarboxylic and phosphonocarboxylic acid technology on which BWA products are based has led to additives which out-perform ...

Coagulants

by Neo Solutions, Inc.     based in Beaver, PENNSYLVANIA (USA)

Neo Solutions, Inc. offers a broad line of high cationic charge, water soluble polymers and inorganic coagulants as ready-to-use liquid products. These products include:• linear and branched epi/DMA polyamines• polyDADMACs across a wide range of molecular weights• melamine resins• aluminum-based coagulants, including alum, AlCl3, and polyaluminum ...

Flocculants

by Neo Solutions, Inc.     based in Beaver, PENNSYLVANIA (USA)

Flocculants are substances added to a mixture to increase the aggregation or clumping of suspended particles. These aggregates allow the material to then settle out by gravity to facilitate the recovery of liquid. Neo Solutions, Inc. offers cost effective flocculants for a wide variety of liquid / solid separation applications, ...

Chlorinators

by TEMAK S.A.     based in Acharnes (Menidi) Attikis, GREECE

Chlorination is widely used for water disinfection. as a common practice. from all Water Works in Greece and all over the world. For the application is used commercial sodium hypochlorite (commercial bleach). which is a liquid and therefore the addition in the water stream is easy. mainly automatic.

EnvirozoneTM - Model RROG-500 - Ozonizer

by Envirozone Technocraft Pvt. Ltd.     based in Surat, INDIA

Type Corona discharge, Capacity 100mg /hr with air as feed gas, Feed gas Ambient Air, Cooling Air cooled M.O.C Wetted parts in ozone compatible material, Outer panels in ABS Plastic, Power supply 230-240 VAC, 50-60 Hz, single phase, Controls On-Off, circulation & Purification

Cooling Water Treatment Chemicals

by Kurita Water Industries Ltd.     based in Tokyo, JAPAN

We supply chemicals to treat cooling water at office buildings and apartment blocks. These chemicals prevent the proliferation of harmful Legionella bacteria and the attachment of scales and slime, thereby ensuring the supply of hygienic and safe cooling water.

Model CH100 - Dry Polymer Preparation System

by SNF Polydyne, Inc.     based in Riceboro, GEORGIA (US) (USA)

The SNF Floquip CH100 Dry Polymer System is specifically designed for customers that will use up to 100-pounds of dry polymer per day. Economics, automatic control, dependability and ease of operation are some of the benefits of this system. Years of experience with dry polymer preparation combined with the knowledge of the leading manufacture of ...

Model DB Series - Dry Polymer Preparation System

by SNF Polydyne, Inc.     based in Riceboro, GEORGIA (US) (USA)

The Dry Polymer Preparation Systems are designed for dependable operation. Years of field experience with dry polymer preparation, combined with the knowledge of the leading manufacturer of water-soluble polymers, is incorporated into every design.

Model DH Series - Dry Polymer Preparation System

by SNF Polydyne, Inc.     based in Riceboro, GEORGIA (US) (USA)

The Dry Polymer Preparation Systems are designed for dependable operation. Years of field experience with dry polymer preparation, combined with the knowledge of the leading manufacturer of water-soluble polymers, is incorporated into every design.

Need help finding the right suppliers?

Let the XPRTs do the work for you