Flocculation Equipment in Gabon

Served | Office inNear
71 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Flocculation ×

  • Location: Africa ×

  • Location: Gabon ×

Membrane Bioreactors

by T&D WATER TECHNOLOGIES     based in Polverara (PD), ITALY

The T&D biological membrane systems can be used in a wide range of applications, ensuring the possibility of re-use of the purified water while maintaining compact dimensions of the structures. Purification output of the MBR process is very high and the other big advantage is the low production of excess sludge.

Horizontal and Vertical Flocculators

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

WesTech Flocculators are custom designed for all your flocculation needs. Energy is transferred into water through the use of paddle wheels which promote particle agglomeration to form large, fast-settling floc particles. Typically the process applies tapered flocculation to the inlet stream, where the first stage has high energy input (velocity ...

Eriez - Permanent Magnetic Flocculators

by Eriez Magnetics Europe Ltd     based in Bedwas, UNITED KINGDOM

Eriez Permanent Magnetic Flocculators aid in the separation of minute magnetic particles from liquids and slurries. They are used widely in the iron and coal mining industries to speed settling of fine magnetic particles in ore slurries and heavy media slurries. They are also finding new use in steel and other industries for agglomerating fine ...

Paddle Wheel Type Flocculator

by Napier-Reid Ltd.     based in Toronto, ONTARIO (CANADA)

Paddle wheel flocculators rotate at low rpm and dissipate energy into water. They enhance the process of flocculation by promoting agglomeration of the flocs. Based on the configuration, the paddle flocculator can be classified as Vertical paddle-wheel flocculator and Horizontal paddle-wheel flocculator. Napier Reid designs and manufactures both ...

EnviroFloc - Flocculants

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

EnviroFloc flocculants from Ovivo are available in a large range of both powder and liquid emulsion polymer formulations, including EnviroFloc 3000, 4000 and 5000 formation.

Pipe Flocculator

by FRC Systems International, LLC     based in Cumming, GEORGIA (US) (USA)

The F Series Flocculator is a Plug Flow Reactor (PFR) type coagulation/flocculation system, consisting of a long serpentine pipe of a specific length and diameter. The term 'plug flow' refers to the fact that retention time and/or mixing energy is constant in any given cross section of the pipe. As such, all particles are subjected to the same ...

WesTech - Model RapiSand™ - Ballasted Flocculation

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

The WesTech RapiSand™ Ballasted Flocculation System is a high rate clarification process using rapid mixing and multi-stage flocculation, followed by sedimentation. RapiSand sedimentation is extremely fast and can be applied in a wide variety of suspended solids removal applications. RapiSand's typical uses include expanding plant capacity, ...

Genefloc - Model GPF - Membrane Compatible Flocculant

by Genesys International Limited     based in Middlewich, UNITED KINGDOM

To minimise membrane fouling and reduce cleaning frequency the silt density index (SDI) should be kept as low as possible. Genefloc GPF can be used to improve the performance of filtration equipment and has been developed as a general-purpose flocculant for use in surface, well and process waters with medium to high SDI values. Genefloc GPF is ...

Model C-Floc - Contact Flocculation

by SFC Schueffl & Forsthuber Consulting / SFC Umwelttechnik GmbH     based in Salzburg, AUSTRIA

Contact flocculation was originally developed for an optimum physico - chemical pre-treatment of surface waters in order to gain potable water, whereby the technological phases of destabilization, micro - flocculation, return sludge contact and macro - flocculation are separated in individual mixing reactors.Consequently, optimum retention times ...

ETM - Model super8XC - Cationic Flocculants for Polyacrylamide Mannich

by Shanghai ETM Material Technical Co.,Ltd     based in Shanghai, CHINA

ETM-super8XC cationic flocculants is polyacrylamide Mannich modified products, with a strong ionization of quaternary ammonium groups and tertiary amine groups, and the molecular weight is 10 million. So compared with the traditional Mannich modified products, it shows more excellent characteristic: applied in wider rang of PH status, higher ...

Need help finding the right suppliers?

Let the XPRTs do the work for you