Flocculation Equipment in Haiti

Served | Office inNear
70 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Flocculation ×

  • Location: Latin America ×

  • Location: Haiti ×

Paddle Wheel Type Flocculator

by Napier-Reid Ltd.     based in Toronto, ONTARIO (CANADA)

Paddle wheel flocculators rotate at low rpm and dissipate energy into water. They enhance the process of flocculation by promoting agglomeration of the flocs. Based on the configuration, the paddle flocculator can be classified as Vertical paddle-wheel flocculator and Horizontal paddle-wheel flocculator. Napier Reid designs and manufactures both ...

EnviroFloc - Flocculants

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

EnviroFloc flocculants from Ovivo are available in a large range of both powder and liquid emulsion polymer formulations, including EnviroFloc 3000, 4000 and 5000 formation.

Pipe Flocculator

by FRC Systems International, LLC     based in Cumming, GEORGIA (US) (USA)

The F Series Flocculator is a Plug Flow Reactor (PFR) type coagulation/flocculation system, consisting of a long serpentine pipe of a specific length and diameter. The term 'plug flow' refers to the fact that retention time and/or mixing energy is constant in any given cross section of the pipe. As such, all particles are subjected to the same ...

Membrane Bioreactors

by T&D WATER TECHNOLOGIES     based in Polverara (PD), ITALY

The T&D biological membrane systems can be used in a wide range of applications, ensuring the possibility of re-use of the purified water while maintaining compact dimensions of the structures. Purification output of the MBR process is very high and the other big advantage is the low production of excess sludge.

Horizontal and Vertical Flocculators

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

WesTech Flocculators are custom designed for all your flocculation needs. Energy is transferred into water through the use of paddle wheels which promote particle agglomeration to form large, fast-settling floc particles. Typically the process applies tapered flocculation to the inlet stream, where the first stage has high energy input (velocity ...

Genefloc - Model GPF - Membrane Compatible Flocculant

by Genesys International Limited     based in Middlewich, UNITED KINGDOM

To minimise membrane fouling and reduce cleaning frequency the silt density index (SDI) should be kept as low as possible. Genefloc GPF can be used to improve the performance of filtration equipment and has been developed as a general-purpose flocculant for use in surface, well and process waters with medium to high SDI values. Genefloc GPF is ...

Coagulants & Flocculants

by Ecologix Environmental Systems, LLC     based in Alpharetta, GEORGIA (US) (USA)

Coagulants and flocculant's are formulated to assist in the solids/liquid separation of suspended particles in solution. Such particles are characteristically very small and the suspended stability of such particles (colloidal complex) is due to both their small size and to the electrical charge between particles. Conditioning a solution to ...

WesTech - Model RapiSand™ - Ballasted Flocculation

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

The WesTech RapiSand™ Ballasted Flocculation System is a high rate clarification process using rapid mixing and multi-stage flocculation, followed by sedimentation. RapiSand sedimentation is extremely fast and can be applied in a wide variety of suspended solids removal applications. RapiSand's typical uses include expanding plant capacity, ...

Flocculant Dosing System

by Shanghai Centrifuge Institute Co., Ltd     based in Shanghai, CHINA

The 2-box and 3-box flocculant dosing device produced by our company is an automatic mechanism which doses PAM powder into solution. By dosing in batches, the flocculant particles will be fully cured to achieve the desired results. Flocculant dosing device can be operated through electric control panel from long distance, which is safe, convenient ...

Bentonite Clay-Based Flocculants

by CETCO Oilfield Services Company     based in Covington, LOUISIANA (USA)

For over 30 years, our bentonite clay-based, dry, chemical flocculants have cleaned industrial wastewater in one simple step. Our cost-effective waste minimization process uses single reactant chemicals and is safe, simple, and easy to use for the removal of emulsified oils, heavy metals and suspended solids from wastewater.

Need help finding the right suppliers?

Let the XPRTs do the work for you