Flocculation Equipment in Sweden

Served | Office inNear
98 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Flocculation ×

  • Location: Europe ×

  • Location: Sweden ×

Paddle Wheel Type Flocculator

by Napier-Reid Ltd.     based in Toronto, ONTARIO (CANADA)

Paddle wheel flocculators rotate at low rpm and dissipate energy into water. They enhance the process of flocculation by promoting agglomeration of the flocs. Based on the configuration, the paddle flocculator can be classified as Vertical paddle-wheel flocculator and Horizontal paddle-wheel flocculator. Napier Reid designs and manufactures both ...

EnviroFloc - Flocculants

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

EnviroFloc flocculants from Ovivo are available in a large range of both powder and liquid emulsion polymer formulations, including EnviroFloc 3000, 4000 and 5000 formation.

Pipe Flocculator

by FRC Systems International, LLC     based in Cumming, GEORGIA (US) (USA)

The F Series Flocculator is a Plug Flow Reactor (PFR) type coagulation/flocculation system, consisting of a long serpentine pipe of a specific length and diameter. The term 'plug flow' refers to the fact that retention time and/or mixing energy is constant in any given cross section of the pipe. As such, all particles are subjected to the same ...

Planotex - Pipe Flocculator (PPF)

by Planotex GmbH     based in Neuried, GERMANY

Flocculation serves to separate solids suspended in processor wastewater in the form of flocs. Subsequently, such flocs are removed from the water by means of flotation or sedimentation. This is a highly efficient and economical method for treating wastewater. Flocculation with subsequent separation in a flotation or settling plant is adapted to ...

Pipe Flocculators

by Novotec nv     based in Merelbeke, BELGIUM

Novotec NPF-fl occulators constitute an ideal mixing solution for the physicochemical treatment of waste water. These pipe flocculators are equipped with injection points for chemicals, a connection point for pH-measurement and sampling taps, enabling monitoring of every single important step in the entire process.

Flocculates Polymers

by Skandinaviska IFAB Filtrering AB     based in Torslanda, SWEDEN

Duromax Floc consists of organic polymers of high molecular weight, which are used to improve dewatering, and also facilitate the formation of floccules, which are large and easily separated out. There are three types of polymer: cationic, anionic and non-ionic. Duromax Floc is available in both powdered and liquid forms.

Membrane Bioreactors

by T&D WATER TECHNOLOGIES     based in Polverara (PD), ITALY

The T&D biological membrane systems can be used in a wide range of applications, ensuring the possibility of re-use of the purified water while maintaining compact dimensions of the structures. Purification output of the MBR process is very high and the other big advantage is the low production of excess sludge.

Horizontal and Vertical Flocculators

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

WesTech Flocculators are custom designed for all your flocculation needs. Energy is transferred into water through the use of paddle wheels which promote particle agglomeration to form large, fast-settling floc particles. Typically the process applies tapered flocculation to the inlet stream, where the first stage has high energy input (velocity ...

Genefloc - Model GPF - Membrane Compatible Flocculant

by Genesys International Limited     based in Middlewich, UNITED KINGDOM

To minimise membrane fouling and reduce cleaning frequency the silt density index (SDI) should be kept as low as possible. Genefloc GPF can be used to improve the performance of filtration equipment and has been developed as a general-purpose flocculant for use in surface, well and process waters with medium to high SDI values. Genefloc GPF is ...

Flocculants and Coagulants

by Applied Chemicals International Group (ACAT)     based in Vienna, AUSTRIA

Solid-liquid separation in the treatment of municipal and industrial wastewater and sludgeOur highly effective synthetic flocculants are water-soluble polymers with a high molecular weight. A wide range of molecular weights and charges ensures flocculation even with different media. Our products are available in solid, liquid and dispersion form.

Need help finding the right suppliers?

Let the XPRTs do the work for you