jet mixing Equipment in South Korea

Serving South Korea | Office in South KoreaNear South Korea
41 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Industrial Mixing ×

  • Keyword: jet mixing ×

  • Location: Asia & Middle East ×

  • Location: South Korea ×

KLa - Jet Mixing System

by KLa Systems, Inc.     based in Assonet, MASSACHUSETTS (USA)

Jet Mixers offer superior independent control of mixing and oxygen transfer in aerobic/anoxic processes and creates excellent energy distribution while minimizing power input in large tanks. This mixing technology results in better energy distribution and decreased reaction times.

Aipu Solids control - Model SLH - Jet mud mixing pump

by Aipu Solids control-Shaanxi Aipu     based in CHINA

Mud mixing pump including 2 types. One is the jet mixing pump the other is the swirl hopper pump. Aipu provide you flexible and optimal options on mud mixing pump. The detail is as below:1.Hoppers can be Venturi hopper or Swirl hopper2.Ideal design on sufficient working pressure make pumps higher performance3.New style with better feasibility ...

Vermeer - Model MX125 - Mixing System

by Vermeer     based in Pella, IOWA (USA)

Optimize your horizontal directional drill’s performance with the MX125. Designed for small-diameter, short distance horizontal directional drilling jobs, the MX125 is powered by a 6.7 hp/5 kW Honda gas engine. It comes with your choice of a 300 gallon/1136 L or 500-gallon/1892-L tank.

KLa - Jet Aeration System

by KLa Systems, Inc.     based in Assonet, MASSACHUSETTS (USA)

Jet Aerators transfer oxygen by simultaneously introducing large volumes of high kinetic energy liquid and air through a series of jet nozzles. The high velocity liquid exits the inner, primary jet and rapidly mixes with the incoming air in the outer jet. This intense mixing and high degree of turbulence in the gas/liquid cloud travels outward ...

Slot Injector - Superior Jet Aeration System

by KLa Systems, Inc.     based in Assonet, MASSACHUSETTS (USA)

Introduced in 1979 by Bayer AG, the Slot Injector is similar to a modern jet aerator but uses a slot-shaped configuration to achieve higher efficiencies. The slot-shaped nozzle and mixing chamber provide a greater shear surface for mass transfer than a circular jet opening of identical area.

Aqua Jet - Surface Mechanical Aerator

by Aqua-Aerobic Systems, Inc.     based in Loves Park, ILLINOIS (USA)

The Aqua-Jet surface mechanical aerator may possibly be the most imitated waste water aerator in the world. But, as with other manufactured products, copies never equal the original in terms of reliability and durability.

Aqua-Jet II - Contained Flow Aerator

by Aqua-Aerobic Systems, Inc.     based in Loves Park, ILLINOIS (USA)

Contained flow aerator is for applications which require continued operation of aeration equipment during cold weather months, but are limited because of inadequate heat sink due to process selection or environmental conditions. This aerator has proven to operate efficiently in a variety of applications, even in sub-zero temperatures.

Kemtron - Model KT-SM-500 - High Efficiency Jet-Shear Mud Mixing Systems

by KEMTRON Technologies, Inc.     based in Stafford, TEXAS (USA)

KEMTRON Technologies has a complete line of mud mixing equipment designed to assist operators with the greatest available efficiency in blending. Bentonite, polymers and other powder additives have traditionally been added to assist in achieving the properties needed from drilling mud such as viscosity for hole cleaning, water loss control and ...

Directional Mix Jet Aerators

by Mixing Systems, Inc.     based in Dayton, OHIO (USA)

One of six directional mix jet aerators installed in a circular tank. Two of the six directional mix jet aerators installed in a 180 ft diameter tank for a pulp and paper mill. Four directional mix jet aerators installed in a 650 ft by 230 ft lagoon creating an oxidation ditch flow pattern. Large directional mix jet aerator (one of seven) with a ...

Eddy - Mix Jet Aerators

by Mixing Systems, Inc.     based in Dayton, OHIO (USA)

Eddy mix jet aerator installed in the center of a cone-bottom tank.Single eddy mix jet aerator in center of 65 ft diameter, cone-bottom tank. Liquid surface during aeration is also shown. FRP eddy mix jet aerator with 12-inch liquid line and 8-inch air line.Eddy mix jet aerator installed on the end of a directional mix jet aerator. Other ...

Need help finding the right suppliers?

Let the XPRTs do the work for you