sludge mixers Equipment in East Timor

Served | Office inNear
73 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Industrial Mixing ×

  • Keyword: sludge mixers ×

  • Location: Asia & Middle East ×

  • Location: East Timor ×

WesTech - Model ExtremeDuty™ - Sludge Mixer

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

WesTech ExtremeDuty™ Sludge Mixers provide vigorous mixing of digester contents to prevent stratification and improve the anaerobic process. They reliably speed gas production while reducing foaming and scum accumulation. This rugged design was originally developed to reduce the high service costs of egg-shaped digester mixers. It has proven ...

Hydraulic Sludge Mixers

by Mixing Systems, Inc.     based in Dayton, OHIO (USA)

The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles ...

Paddle Mixers/Pug Mixers

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro paddle mixers / pug mill agitators are an effective severe-duty mixer for lime-stabilized sludge applications in wastewater treatment plants and for the mixing and agglomeration of a wide variety of other industrial, agricultural, and hygienic food materials. Mixing intensity, retention time, and product appearance is controlled by changing ...

Eimix - Mechanical Sludge Mixers

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

Anaerobic digestion tanks (containing sludge full of grit, rags and other extraneous materials) are expected to  receive thorough and complete mixing to ensure uniform temperature, solids distribution and microorganism contact with incoming sludge to increase gas production and destruction of solids.  The patented Eimix ragless propeller ...

OPEC - Model SRJ - Submerged Rotary Jet Mixer

by Oil Pollution Environmental Control Ltd     based in Birstall, Batley, UNITED KINGDOM

The SRJ submerged rotary jet mixer directs powerful jets of oil that sweep through the sludge on the floor of the oil storage tank and blends the soluble hydrocarbons into the total contents.

Mixers

by SISMAT ULUSLARARASI LTD. STI.     based in KOCAELI, TURKEY

Mixers can be classified under three groups: Mixers of propeller, turbine, flocculator, etc. types, utilised to prepare solutions of a given volume and consisting of motor, impeller and shaft; Static mixers that agitate and mix different liquids by changing the flowrate; and Double -shaft spiral mixers used mostly in sludge dewatering plants, for ...

Submersible Stainless Steel Mixer (150 RPM) POPR-I

by Landia     based in Lem, DENMARK

Submersible agitator for waste water treatment plants and industry (stainless steel). Five motor sizes from 1.1 to 7.5 kW. Capacity up to approx. 3,850 m³/hour. 150 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

Model POD-I - Submersible Mixer - 750 RPM

by Landia     based in Lem, DENMARK

Submersible agitator for waste water treatment plants and industry. Nine motor sizes from 0.55 to 7.5 kW. Capacity up to approx. 2,050 m³/hour. 750 propeller revolutions/minute. Axial thrust from 430 N to 2150 N.

Model POP-I - Submersible Mixer - 300 RPM

by Landia     based in Lem, DENMARK

Submersible agitator for waste water treatment plants and industry. 10 motor sizes from 1.1 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

Model POD-I - Submersible Mixer - 1500 RPM

by Landia     based in Lem, DENMARK

Submersible mixer for waste water treatment plants and industry. Nine motor sizes from 1.1 to 18.5 kW. Capacity up to approx. 3,800 m³/hour. 1500 propeller revolutions/minute. Axial thrust from 430 N to 2150 N.

Need help finding the right suppliers?

Let the XPRTs do the work for you