membrane separation Equipment in Jamaica

Served | Office inNear
136 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Membrane Filtration ×

  • Keyword: membrane separation ×

  • Location: Latin America ×

  • Location: Jamaica ×

Nafion - Model 212 - Membrane

by Fuel Cells Etc     based in College Station, TEXAS (USA)

Untreated Nafion 212 is 50.8 micrometers (2 mil) thick. The membrane is positioned between a backing film and a coversheet. DuPont™ Nafion® 212 membranes are based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form, and exhibit substantially lower fluoride ion release compared to the non-stabilized ...

Nafion - Model 117 - Membrane

by Fuel Cells Etc     based in College Station, TEXAS (USA)

Untreated Nafion 117 is 183 micrometers (7.2 mil) thick. DuPont™ Nafion® 117 membranes are non-reinforced films based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form. The physical properties remain the same for the chemically stabilized membranes, which exhibit substantially lower fluoride ion release ...

Nafion - Model 115 - Membrane

by Fuel Cells Etc     based in College Station, TEXAS (USA)

Untreated Nafion 115 is 127 micrometers (5 mil) thick. DuPont™ Nafion® 115 membranes are non-reinforced films based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form. The physical properties remain the same for the chemically stabilized membranes, which exhibit substantially lower fluoride ion release ...

ENVOPUR - Model EDI - Electrochemical Deionisation

by EnviroChemie GmbH Technology for Water     based in Rossdorf, GERMANY

Electro-deionization (EDI) is based on the engineering principle of electrodialysis. It is an electrochemical separation process in which ions from a low concentration solution pass through a special membrane to a solution of higher concentration. The activating force is an electric field between cathode and anode.

ProMinent - Nanofiltration Systems

by ProMinent Group - ProMinent GmbH     based in Heidelberg, GERMANY

Nanofiltration is based on the same principle as reverse osmosis. The difference: the separation line is slightly lower. Ions solved into the water are less filtered than with reverse osmosis. This saves operation costs. Typical salt rejection rates are at ca. 80 – 85%. Here, polyvalent ions (e.g. Ca, Mg) are kept back better than univalent ...

Convergence Inspector - Model MBR - Membrane Bio Reactor

by Convergence Beheer B.V.     based in Enschede, NETHERLANDS

The Convergence Inspector Membrane Bio Reactor is based on the conventional wastewater process. The separation of micro-organism is performed by filtration by membranes. The Membrane Bio Reactor system is user-specific for a variety of characterization processes/experiments. All the Convergence Inspectors are fully customized. Almost every type of ...

Sterlitech - Ceramic Membranes

by Sterlitech Corporation     based in Kent, WASHINGTON (USA)

To meet your filtration application needs, Sterlitech offers a ceramic membrane for Microfiltration, Ultrafiltration, and Nanofiltration. These ceramic disc membranes are 2.5mm thick and available in two diameters, 47mm and 90mm. The active layer for the MF membranes is Titania and for the UF/NF membranes it is Zirconia. All the ceramic ...

AltaFilter - Ultrafiltration Membrane System

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

The AltaFilter Ultrafiltration Membrane System, featuring the Polymem Ultrafiltration Module, is an advanced filtration process used by municipalities and industries alike to produce high quality drinking and process water.

Custom Nafion - Model Calculator - Membrane

by Fuel Cells Etc     based in College Station, TEXAS (USA)

Choose the exact dimensions you need for any type of Nafion Membrane! Please contact us if you are looking for Nafion prices above .34m². Nafion Calculator Limits: Maximum Length: 100cm Maximum Width: 40cm The Membrane is used to separate the anode and cathode compartment of Proton Exchange Membrane (PEM) fuel cells and water electrolyzers.

AquaMB Process - Multiple Barrier System

by Aqua-Aerobic Systems, Inc.     based in Loves Park, ILLINOIS (USA)

The AquaMB Process is a multiple barrier system that integrates biological treatment and clarification with dual barrier filtration consisting of cloth media and external membrane separation. It is ideal for wastewater plants that require optimum performance and flexibility at the lowest cost of ownership. Compared to multiple unit processes and ...

Related Terms for membrane separation

Need help finding the right suppliers?

Let the XPRTs do the work for you