microfiltration Equipment in Oregon

80 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Membrane Filtration ×

  • Keyword: microfiltration ×

  • Location: USA ×

  • Location: Oregon ×

atech - Ceramic Microfiltration

by atech innovations gmbh

atech innovations supplies membranes for ceramic microfiltration that can be applied to liquids in the food sector, or biotechnology, environmental and chemical industries. atech innovations provides top quality products at competitive prices. We are one of the market leaders and currently provide ceramic membranes to over 5,000 installations ...

Microfiltration Membranes

by Esmil Process Systems Ltd

Microfiltration (MF) is a process which removes contaminants from a liquid by passage through a microporous membrane, physically excluding particulate matter. A typical MF membrane pore size range is 0.1 to 10 µm.

Lama - Microfiltration Inox.

by Lama Sistemas de Filtrado

Microfiltration is a very efficient technology for solids separation and recovery of products in all kinds of liquids. Microfiltration has a retention grade smaller than a conventional filter, the cartridges used for microfiltration have pore size of 0.1-20 microns. By having a porosity so small, these filters have the additional advantage of ...

HYDRAcap - Model MAX - Superior Microfiltration

by HYDRANAUTICS A Nitto Denko Company

HYDRAcap MAX is used to treat a wide range of highly variable waters as either primary treatment or as pretreatment to reverse osmosis (RO) and nanofiltration (NF). Compared to conventional pretreatment, the HYDRAcap MAX offers the combined benefits of high recovery and low footprint requirement due to its optimized membrane area and novel ...

WWE - Microfiltration Systems

by Water & Wastewater Equipment Company

Our tubular crossflow microfiltration membrane systems are designed to remove selected inorganic, organic, or heavy metal contaminants to meet the regulatory compliance and/or water recycle objectives. They provide nominal 0.2 micron filtration, require no polymer addition, and typically require less operator attention than clarification systems. ...

Model 2 Inch - Sanitary Microfiltration Elements

by Synder Filtration

Synder Filtration's 2' sanitary microfiltration elements are ideal where 800KD to .2µ membrane pore sizes are required for pilot studies and other low volume operations. With large inventories of these elements stored strategically around the globe, common models are available with same-day shipping.

MICRODYN - Tubular and Capillary Modules for Microfiltration

by MICRODYN-NADIR GmbH

MICRODYN filter modules have been developed for Cross flow micro filtration. The CMF represents a modern filtration method for the separation of suspended particles or liquid emulsions.

TriSep - Model TM10 - Polyvinylidene Fluoride (PVDF) Microfiltration Membrane

by TriSep Corporation

TM10 membrane is a polyvinylidene fluoride (PVDF) microfiltration membrane with a pore size of 0.2 micron. TM10 is a high flux membrane used to remove macromolecules and is typically used to concentrate large organic solutes.

bioFLOW - Microfiltration (MF) Tubular Membrane System

by BioprocessH2O

The bioFLOW MF System is a pressure driven backpulsed microfiltration process, which physically separates solutions and dispersions into concentrates and permeates. The wastewater is separated as it circulates across the tubular membrane at a high velocity. Permeate is forced through the pores of the membrane, while suspended particulate remains ...

Microfiltration (MF) for Membrane System

by PAPSCO, Inc.

Removal of sub micron particulate using crossflow technology. Microfiltration (MF) has significant applications in simple dead-end filtration for water, sterile fruit juices and wine, and aseptic pharmaceuticals. However, not all applications that benefit from MF operate successfully in the dead-end mode, and a large portion of the MF market has ...

Need help finding the right suppliers?

Let the XPRTs do the work for you