ultrafiltration Equipment in California

Serving California | Office in CaliforniaNear California
104 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Membrane Filtration ×

  • Keyword: ultrafiltration ×

  • Location: USA ×

  • Location: California ×

SnowPure - Model ExcellUltra™ - Ultrafiltration (UF) Membranes

by SnowPure Water Technologies     based in San Clemente, CALIFORNIA (USA)

SnowPure’s ExcellUltra ultrafiltration (UF) membranes are uniquely designed for pretreatment of RO membranes, and for final filtration of ultrapure water.

TriSep - Model UE50 - Polyethersulfone Ultrafiltration Membrane

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

UE50 membrane is a polyethersulfone ultrafiltration membrane with a molecular weight cut-off of 100,000 Daltons. UE50 rejects 90% of 100,000 molecular weight dextran. UE50 membrane is used for applications to remove macromolecules or to concentrate large organic solutes.

TriSep - Model TM10 - Polyvinylidene Fluoride (PVDF) Microfiltration Membrane

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

TM10 membrane is a polyvinylidene fluoride (PVDF) microfiltration membrane with a pore size of 0.2 micron. TM10 is a high flux membrane used to remove macromolecules and is typically used to concentrate large organic solutes.

TriSep - Model UA60 - Piperazine-Based Thin-Film Composite Membrane

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

TriSep UA60 Membrane is a piperazine-based thin-film composite membrane that is considered both a “tight” UF membrane as well as an “open” or “loose” NF membrane. UA60 has limited monovalent salt pore size and MgSO4 pore size between 70-90%. UA60 has a molecular weight cut-off between 1,000-3,500 Daltons. Due to ...

TriSep - Model UE10 - Polyethersulfone Ultrafiltration Membrane

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

UE10 membrane is a polyethersulfone ultrafiltration membrane with a molecular weight cut-off of 10,000 Daltons. This membrane rejects 95% of cytochrome c, an amino acid with a 12,000 molecular weight. UE10 is used in water purification applications such as dialysate water purification and beverage water make-up, as well as process applications ...

TriSep - Model UF10 - Polyethersulfone Ultrafiltration Membrane

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

UF10 is a new 10K molecular weight cut off (MWCO) polyethersulfone ultrafiltration membrane developed for use in food, dairy, and process applications. Combined with TriSep's sanitary TurboClean outer shell these membranes are ideal for milk and whey protein concentration.

GWT Series - Ultra Filtration Systems

by Genesis Water Technologies, Inc     based in Maitland, FLORIDA (USA)

The GWT series UF system solutions incorporate advanced UF rigid membrane technology to provide cost effective, high performance output for a wide range of water and wastewater treatment, filtration, water reuse applications. GWT ultrafiltration system solutions utilize industry leading backwashable rigid membrane technology along with a membrane ...

Ultrafiltration Systems

by LIFESTREAM Watersystems Inc.     based in Huntington Beach, CALIFORNIA (USA)

Ultrafiltration is a membrane separation process which removes particles such as fine silt and bacteria and large organic molecules such as oil and hydrocarbons from water. Ultrafiltration is a very hardy process and can take water which is very contaminated such as river or lake surface water and convert it into potable drinking water in one step ...

Model JG-1Q00 - POE Ultrafiltration System

by Payne USA     based in Temecula, CALIFORNIA (USA)

Point of Entry Water Filtration; Whole House.Double Skinned Membrane; Greater Reliability.High Operating Pressures.99% efficient, Greatly Reduces Waste of Our Water Resources.Easily back-flushed due to membrane-housing design.Long membrane life.Very easy element replacement.>5 log reduction of Bacteria, Cysts, Viruses and turbidity reduction

Model UG-2000 - 2-Stage Ultrafiltration System

by Payne USA     based in Temecula, CALIFORNIA (USA)

Ultrafiltration is a low-pressure membrane process,capable of removing colloidal materials, fine suspensions, bacteria, virus, suspended solids and large molecular weight organic materials depending on the Molecular Weight cutoff of the membrane.Ultrafiltration hollow fiber elements are made from polyethersulfone (PES) a hydrophilic, chemically ...

Need help finding the right suppliers?

Let the XPRTs do the work for you