Microfiltration Equipment

609 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Microfiltration ×


by SAATI Deutschland GmbH     based in Raesfeld, GERMANY

Along with process filtration, microfiltration plays a key role in our product range. For us, the term microfiltration includes extremely diverse separation applications in almost all sectors and branches of industry.



Tangential Microfiltration is a process of physical-mechanical separation.As the medium flows tangentially through the membranes, the filtrate or permeate moves at right angles. This filtration method is called “dynamic filtering”. To separate the compounds do not undergo any chemical modification, which means they can be recovered. ...

TriSep - Model TM10 - Polyvinylidene Fluoride (PVDF) Microfiltration Membrane

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

TM10 membrane is a polyvinylidene fluoride (PVDF) microfiltration membrane with a pore size of 0.2 micron. TM10 is a high flux membrane used to remove macromolecules and is typically used to concentrate large organic solutes.

ALGAS - Microfilter

by Cellwood Machinery AB     based in Nässjö, SWEDEN

The ALGAS Microfilter is basically a drum filter but with features that make it extra special. Filtering from the inside out allows the recovery trough to be installed inside the drum. This means the filter operates with a much higher level compared to conventional designs, increasing filtration time and improving efficiency.

Media Filtration System (MFS)

by Echelon Environmental     based in Markham, ONTARIO (CANADA)

The Media Filtration System (MFS) consists of media-filled cartridges designed to capture a wide range of particles to meet stringent regulatory requirements. Due to its large storage sump, the system also acts as a gravity settlement tank for larger sized particles. This ultimately eliminates the need for an upstream storage sump in roadway ...

NovaSet - Cassettes for Pilot Scale and Commercial Applications

by ZIND Verfahrenstechnik     based in Mainz, GERMANY

At pilot stage, the primary membrane candidate has been chosen, as process parameters. Typically at this stage, the production method is being verified and production materials produced for toxicology or pre-clinical trials and predictable scalability is imperative. In order to facilitate the manufacturing life cycle of a successful therapeutic ...

bioFLOW - Microfiltration (MF) Tubular Membrane System

by BioprocessH2O     based in Portsmouth, RHODE ISLAND (USA)

The bioFLOW MF System is a pressure driven backpulsed microfiltration process, which physically separates solutions and dispersions into concentrates and permeates. The wastewater is separated as it circulates across the tubular membrane at a high velocity. Permeate is forced through the pores of the membrane, while suspended particulate remains ...

Ultrafiltration and Microfiltration Equipment

by Ecochem International Inc.     based in Waterloo, QUEBEC (CANADA)

Multiple Microfiltration Units Standard features: Max. pressure: 200 PSI (13.5 atm.). Max. Op. temperature: 250ºF (120ºC). Construction / Frame: Stainless Steel. Max. differential pressure: 75 PSI (5.1 atm.). Voltage: 220/110 - 575/380 V 60/50 Hz.

Need help finding the right suppliers?

Let the XPRTs do the work for you