Nutrient Removal Equipment in Gabon

Served | Office inNear
87 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Nutrient Removal ×

  • Location: Africa ×

  • Location: Gabon ×

MiniModule or MicroModule Membrane Contactors

by Membrana     based in Wuppertal, GERMANY

Placing a small compact MiniModule® or MicroModule® degassing contactor in the lab system will improve the operation of that system and it will also improve the reliability of the test results since gasses can negatively impact the readings and the solution.

NE - Model 2000PHR - Phosphate Reduction and Control

by Natural Environmental Systems, LLC     based in Carrollton, TEXAS (USA)

NE 2000PHR is highly effective in treating phosphate contaminated wastewater systems. NE 2000PHR works by populating the contaminated water system with naturally occurring bacteria strains that absorb the phosphate. By changing the respiration level - anaerobic to aerobic - this causes the bacteria to ingest the oxygen forcing the phosphate to ...

Purolite - Model A520E - Nitrate Removal

by Purolite Corporation     based in Bala Cynwyd, PENNSYLVANIA (USA)

Purolite A520E is a macroporous strong base anion resin which is specially designed for the removal of nitrates from water for potable processes. The macroporous matrix and special ion exchange group functionality imparts ideal nitrate selectivity to Purolite A520E making this resin particularly suitable for nitrate removal even when moderate to ...

Nitrate Removal

by Napier-Reid Ltd.     based in Toronto, ONTARIO (CANADA)

Nitrate is a toxic contaminant often found in underground water sources, it usually comes from decomposition of nitrate containing waste material such as fertilizers. Strong Base Anion (SBA) Type I or II resins are habitually used for nitrate removal. A nitrate selective resin should also be used in order to avoid sulfate selection conflicts. ...

Caldo - Complete Pollution Control Systems

by Caldo Engineering Ltd.     based in Bromsgrove, UNITED KINGDOM

Regulated Emissions to Atmosphere; Waste gases are often hot and, if they contain fume or dust, Caldo hot gas filters can be used to remove these solids before the gases are released to atmosphere. However, such gases often also contain other pollutants; hot gas filtration can be combined with other techniques to ensure that all of the controlled ...

LemTec - Phosphorous Removal Processes

by Lemna Technologies, Inc.     based in Minneapolis, MINNESOTA (USA)

Aerated lagoons are being required to meet increasingly stringent effluent limits, often including advanced nutrient removal. The LemTec Biological Treatment Process has an effective solution for phosphorous removal that employs a chemical dosing system, low horsepower pumps and mixers. In Lemna’s low-cost and reliable system, phosphorous is ...

Enhanced Biological Phosphorus Removal (EBPR)

by AnoxKaldnes AB - a Veolia Water Company     based in Lund, SWEDEN

Enhanced Biological Phosphorus Removal (EBPR) is an applied biological process where excess phosphorus is removed from the wastewater without requirements of chemical additions. The process makes use of a group of bacteria, commonly referred to as Phosphate Accumulating Organisms (PAO) that can store more phosphorus than needed for growth, giving ...

STM-Aerotor - Biological Nutrient Removal (BNR) System

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

The STM-Aerotor™ Biological Nutrient Removal (BNR) System uses Integrated Fixed Film and Activated Sludge (IFAS) technology as part of a process that provides biological nutrient removal for municipal and industrial wastewater treatment.

PHOSPAQ - Phosphate Recovery

by Paques B.V.     based in Balk, NETHERLANDS

The PHOSPAQ process is applied to recover phosphate from effluents as struvite. Phosphate is becoming scarce, thus making recovery more and more interesting. PHOSPAQ is a cost-effective technology compared to e.g. dosing of iron salts. Moreover, the produced struvite is an excellent slow release fertilizer for N, P and Mg.

ANAMMOX - Ammonia Removal

by Paques B.V.     based in Balk, NETHERLANDS

The ANAMMOX (anaerobic ammonium oxidation) process is an innovative biological process that represents a major breakthrough in nitrogen removal. It is a cost effective, robust and sustainable way of removing ammonium from wastewater and from waste gas. Compared to conventional nitrifation/denitrification, operational costs are reduced by up to 90% ...

Need help finding the right suppliers?

Let the XPRTs do the work for you