oil water separators Equipment in Laos

Served | Office inNear
219 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Oil Water Separation ×

  • Keyword: oil water separators ×

  • Location: Asia & Middle East ×

  • Location: Laos ×

Oil / Water Separator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Designed according to API 421, WesTech API Oil / WaterSeparators combine state-of-the-art separation, skimming and sludge transport technologies into a highly efficient primary oil separation device.

EnviroSEP - Oil And Water Separator

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

Ovivo’s EnviroSEP units provide oil and water separation for a multitude of industrial wastewater, process water pre-treatment and stormwater treatment applications. The unit is designed to remove all free oil from contaminated streams to comply with the most stringent of discharge requirements. Typically, no more than 5mg/l of oil will ...

DESMI - Model BELT - Heavy Oil Recovery System

by DESMI A/S     based in Noerresundby, DENMARK

Many oil spills over recent years have highlighted the problems of recovering very viscous oils at sea. To respond to this challenge DESMI Ro-Clean has developed a line of belt skimmers.

Hilliard HILCO - Model Hilcosep - Coalescer Separator

by The Hilliard Corporation - Star Systems Filtration Division     based in Elmira, NEW YORK (USA)

The Hilcosep was designed to remove moisture and particulate contamination from steam and gas turbine lube oils. Self-sufficient stand-alone models with reservoir capacity ranging from 2,000 gallons to 12,000+ gallons and portable models as well as custom designs are available.

Kimre Liqui-Nomix - Liquid-Liquid Separators

by Kimre, Inc.     based in Homestead, FLORIDA (USA)

Liquid – liquid mixtures must be settled and coalesced before they can be separated. Gravity Settlers or decanters can be either horizontal or vertical vessels designed to continuously settle, coalesce, and withdraw settled liquids. Cyclones and centrifuges have also been used for separating liquid/liquid mixtures by enhancing the settling ...

Emulsified Zero-Valent Iron (EZVI)

by Carus Corporation     based in Peru, ILLINOIS (USA)

EZVI is a surfactant-stabilized, biodegradable emulsion that forms emulsion droplets consisting of an oil-liquid membrane surrounding zero-valent iron (ZVI) particles in water. EZVI capitalizes on the ability of food-grade surfactant, biodegradable vegetable oil, water, and zero-valent Iron to form hydrophobic emulsion droplets (micelles) that ...

Moyno - Model Tri-Phaze - Multiphase Pumping System

by Moyno, Inc.     based in Springfield, OHIO (USA)

The multiphase fluid produced from many oil and gas wells is composed of varying ratios of oil, water, gas and in many cases, small amounts of sand and paraffin. Traditional multiphase fluid transfer involves the use of separation equipment and compressors at the wellsite or satellite to separate the oil, water and gas. The gas can be flared off ...

Model 2880-OWI - Oil/Water Interface Transmitter

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

The sensing probe continuously monitors the capacitance of the inserted probe. As the interface or emulsion layer (rag layer) crosses over the probe, a proportional 4-20 mA output is provided. Typical applications include oil water separators, oil/water knock-out tanks, treater trains and decanting tanks. The 2880-OWI sensing probe monitors the ...

Model 2852-OWS - Oil/Water Separator & Sump Alarm

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

The sensing probe continuously monitors for the oil/water interface in a water filled sump or separator. It is typically used to control pumps, operate valves, or activate alarms. The 2852-OWS sensing probe monitors the capacitance field around the active probe tip. As the volume of separated oil increases in the separator or is drawn down toward ...

Model 4100-OWS - Oil/Water Separator Level Monitor

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

This unique oil level system provides complete flexibility for monitoring oil water separators in one complete package. The 4100-OWS sensing probe monitors the capacitance field between the probe and the concentric shield. As the oil accumulates and displaces the water, the probe capacitance changes. This interface signal is used to provide ...

Need help finding the right suppliers?

Let the XPRTs do the work for you