sludge hoppers Equipment in Aruba

27 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Sludge Management ×

  • Keyword: sludge hoppers ×

  • Location: Latin America ×

  • Location: Aruba ×

Live-Bottom Hoppers & Silos

by Claro Inc

Claro designs and manufactures live-bottom hoppers and material silos that store, doze, transport, and/or precisely meter-out a wide variety of sludges and other materials all without operator assistance. Equipped with well-designed counter-rotating shaftless spiral screws at their base, Claro hopper and silo systems avoid arching or bridging even ...

EUROPELEC - Central Drive Thickener

by EUROPELEC

The job of the EUROPELEC CENTRAL DRIVE THICKENER is to thicken sludge from municipal or industrial wastewater treatment plants. It can be used in small or medium-sized installations. Effluent is channelled to the centre of the tank in the influent well where it is spread evenly and without turbulence over the thickening zone. The clean effluent is ...

Mena Water - Chain Sludge Scraper System

by Mena Water

The most common chain scraper system scrapes sludge from the bottom and skims surface of the tank. A cross collector can be installed in the sludge hopper for transferring the sludge to the removal system. The rectangular scraper is designed to remove grease and oil and other floating solids from the surface of the wastewater and settlement tanks. ...

Moyno - Model 2000 HS - for high solids and sludge cake transfer

by Moyno, Inc.

The Moyno 2000 HS System combines high pump efficiency with low discharge pressure to provide unmatched performance in high solids sludge cake transfer. Compared to hydraulically driven, piston ram type pumps and open conveyors, the Moyno 2000 HS System requires a much lower capital investment, lower operating costs and less maintenance.

Lime-Stabilized Sludge Treatment Systems

by Claro Inc

Claro designs and manufacturers reliable and cost-effective lime-sludge stabilization systems that deliver EPA Class A- or Class B-certified biosolids. Reduction of pathogens, odors, and the vector attraction potential of municipal and other sludges is achieved through a fully automated shaftless spiral conveyor system that enables thorough lime ...

Gravity Thickener for Industrial Sludges

by Passavant-Geiger GmbH - Bilfinger Water Technologies

The sludge is fed through a central influent cylinder mounted to the thickener mechanism into the thickener tank.The thickening process is intensified with the application of vertically mounted stirring members. By means of an echelon type scraper blade assembly the thickened sludge on the tank bottom is removed to a center hopper from where it is ...

Automatic Polyelectrolite Preparation Unit

by INTERECO S.n.c.

Available current models 600 It (two tanks) ( BSB600), 1200 It, 2000 It (three tanks) (BTB 1200 AND BTB 2000) and, under request 3000 It, 4000 It and 5000 It. All models have a simple and reliable functioning. With a bar level controls the polyelectrolite preparation is activated to have always the polyelectrolite tank full. The polyelectrolite ...

Intereco - Granulator

by INTERECO S.n.c.

Manufactured in carbon steel, either painted of hot dip zinc coated. Available under request completely in aisi 304 s.s. Model gra 150 available with hopper for quick lime, completed by a dosing screw with mecanical speed variator and vibration device against bridges.

Intereco - Model COC 200 - Screw Conveyor

by INTERECO S.n.c.

The screw conveyor COC 200 is made by a steel pipe (hot dip zinc coated or painted) with a 219 mm nominal diameter. The screw has a 200 mm diameter and so is its pitch.The unit is completed by bearings and greasers, feed hopper legs, driving groups with a swinging gear box , pulleys and belts to avoid crawling, safety protections. Under request ...

Intereco - Model Cab 1500 - 2000 - Belt Presses

by INTERECO S.n.c.

Robust side frames in high thickness angles and unp shapes. Completely welded and connected between themselves with bolted unp shaped. Completely high thickness hot dip zinc coating. Fasteners in a2 stainless steel. Metal net protections for easy washing of the belt press. Easily removable for maintenance. Protection over gears in aisi 304 s.s. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you