Wastewater Treatment Equipment

4201 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Wastewater Treatment ×


UASB - Intelligent biogas production from waste waters

by Colsen International b.v.

Anaerobic waste water treatment is applied in many industrial areas for waste water purification of water containing large amounts of organics (COD > 2.000 mg/L).This technique is applied to circumvent the high operational costs of aerobic waste water treatment and to produce energy in the form of biogas. For this purpose a number of UASB reactor ...


STM-Aerotor - Biological Nutrient Removal (BNR) Package Plant

by WesTech Engineering, Inc.

The STM-Aerotor™ Biological Nutrient Removal (BNR) Package Plant uses Activated Sludge and Fixed Film technology as part of a process that provides biological nutrient removal for municipal wastewater treatment.


GTS - Wastewater Treatment Plants

by GLOBAL Wastewater Treatment Systems, Inc.

Global plants feature a modified activated sludge design based upon accepted technology that has been successfully used in the United States for many years. Many applications reuse the water for irrigation, or discharge into clean streams, rivers or lakes. The benefits of a “package plant” are combined with custom designed features for ...


Bayoxide - E33 - Arsenic Removal Media

by Severn Trent Services, Inc

The dry, crystalline granular Bayoxide® E33 media was designed with a high capacity for arsenic, providing long operating cycles and low operating costs. The media’s life expectancy is dependent on site-specific water quality and operating levels. Media is filled into the vessels from sacks by gravity or by hydraulic educting. The ...


Proco Style - 271 - Single Super Wide Arch

by Proco Products, Inc.

Proco Style 271, Rubber Expansion Joints are designed for piping systems to absorb pipe movements, relieve stress, reduce system noise/vibration, compensate for misalignment/offset and to protect rotating mechanical equipment against start-up surge forces.


ENTA - Industrial Waste Water Treatment Systems

by ENTA Treatment Systems Engineering Contracting LTD

Industrial wastewater treatment has a unique place in environmental engineering and it has different pollution characteristics for different types of industries. Because of this reason ,it is necessary to develop special solutions for each sector. ENTA’S special solutions are based on the relations between production / water consumption ...


Arcadian - Helios 3000 - Aeration Diffuser

by Arcadian Technologies

The Helios 3000 Aerator contains no materials known to be harmful to the health of humans or the aquatic ecosystem. Ensure that the aeration system is properly balanced such that the aerators are not run above their intended airflow. The aerator contains no sharp edges, moving parts, or other exposed features known to be potentially harmful.


ERG - Stand-Alone Bioscrubbers Packages

by ERG (Air Pollution Control) Ltd

Used as a stand-alone package, or in combination as part of a DryCat system, ERG's biofilter provides trouble-free odour control for small to medium sized sewage treatment plants.


SedVac Sediment Dredge System

by Brentwood Industries, Inc.

The SedVac Sediment Dredge System is a sludge removal system that effectively cleans the basin floor by removing the compression zone layer of sludge. Unlike clog-prone vacuum pipes, the SedVac system uses triangular header wings with 4-inch-high intakes to significantly reduce the opportunity for clogging. With a versatile cable drive that can be ...


Recuperative Thermal Oxidizer

by Epcon Industrial Systems, LP

Epcon's line of Recuperative Thermal Oxidizers operate at 1400°F, with a residence time of 1 second & a heat recovery efficiency of up to 80%. Turbulent flow allows these systems to achieve high destruction efficiency, up to 99.99%.This provides high heat recovery resulting in tremendous costs savings by minimizing the use of natural gas and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you