membrane separation Equipment in Lesotho

Served | Office inNear
95 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Wastewater Treatment ×

  • Keyword: membrane separation ×

  • Location: Africa ×

  • Location: Lesotho ×

Nafion - Model 212 - Membrane

by Fuel Cells Etc     based in College Station, TEXAS (USA)

Untreated Nafion 212 is 50.8 micrometers (2 mil) thick. The membrane is positioned between a backing film and a coversheet. DuPont™ Nafion® 212 membranes are based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form, and exhibit substantially lower fluoride ion release compared to the non-stabilized ...

Nafion - Model 117 - Membrane

by Fuel Cells Etc     based in College Station, TEXAS (USA)

Untreated Nafion 117 is 183 micrometers (7.2 mil) thick. DuPont™ Nafion® 117 membranes are non-reinforced films based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form. The physical properties remain the same for the chemically stabilized membranes, which exhibit substantially lower fluoride ion release ...

Nafion - Model 115 - Membrane

by Fuel Cells Etc     based in College Station, TEXAS (USA)

Untreated Nafion 115 is 127 micrometers (5 mil) thick. DuPont™ Nafion® 115 membranes are non-reinforced films based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form. The physical properties remain the same for the chemically stabilized membranes, which exhibit substantially lower fluoride ion release ...

ENVOPUR - Model EDI - Electrochemical Deionisation

by EnviroChemie GmbH Technology for Water     based in Rossdorf, GERMANY

Electro-deionization (EDI) is based on the engineering principle of electrodialysis. It is an electrochemical separation process in which ions from a low concentration solution pass through a special membrane to a solution of higher concentration. The activating force is an electric field between cathode and anode.

ProMinent - Nanofiltration Systems

by ProMinent Group - ProMinent GmbH     based in Heidelberg, GERMANY

Nanofiltration is based on the same principle as reverse osmosis. The difference: the separation line is slightly lower. Ions solved into the water are less filtered than with reverse osmosis. This saves operation costs. Typical salt rejection rates are at ca. 80 – 85%. Here, polyvalent ions (e.g. Ca, Mg) are kept back better than univalent ...

Convergence Inspector - Model MBR - Membrane Bio Reactor

by Convergence Beheer B.V.     based in Enschede, NETHERLANDS

The Convergence Inspector Membrane Bio Reactor is based on the conventional wastewater process. The separation of micro-organism is performed by filtration by membranes. The Membrane Bio Reactor system is user-specific for a variety of characterization processes/experiments. All the Convergence Inspectors are fully customized. Almost every type of ...

Custom Nafion - Model Calculator - Membrane

by Fuel Cells Etc     based in College Station, TEXAS (USA)

Choose the exact dimensions you need for any type of Nafion Membrane! Please contact us if you are looking for Nafion prices above .34m². Nafion Calculator Limits: Maximum Length: 100cm Maximum Width: 40cm The Membrane is used to separate the anode and cathode compartment of Proton Exchange Membrane (PEM) fuel cells and water electrolyzers.

AquaMB Process - Multiple Barrier System

by Aqua-Aerobic Systems, Inc.     based in Loves Park, ILLINOIS (USA)

The AquaMB Process is a multiple barrier system that integrates biological treatment and clarification with dual barrier filtration consisting of cloth media and external membrane separation. It is ideal for wastewater plants that require optimum performance and flexibility at the lowest cost of ownership. Compared to multiple unit processes and ...

Flat Sheet Membranes

by ULTURA High Recovery Membrane Technologies     based in Long Beach, CALIFORNIA (USA)

We manufacture flat sheet membranes for a variety of industrial and sanitary applications. Our full array of flat sheet membranes includes: ultrafiltration (UF), microfiltration (MF) and nanofiltration (NF) membranes. Our membranes display a wide range of performance characteristics and separation techniques for use in various industrial and ...

MS PTFE Hydrophobic Membrane

by Membrane Solutions LLC     based in North Bend, OHIO (USA)

Product Description MS PTFE membrane media for filtration is made of PTFE(polytetrafluoroethylene), and were drawn 2-demension. It is micro-pore film. The PTFE membrane was laminated with s great variety of fabric and paper. They are new filter media. Applied to extensive industries, including pharmacy, biochemistry, microelectronic, and lab ...

Related Terms for membrane separation

Need help finding the right suppliers?

Let the XPRTs do the work for you