membrane separation Equipment in Michigan

Served | Office inNear
103 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Wastewater Treatment ×

  • Keyword: membrane separation ×

  • Location: USA ×

  • Location: Michigan ×

Nafion - Model 212 - Membrane

by Fuel Cells Etc     based in College Station, TEXAS (USA)

Untreated Nafion 212 is 50.8 micrometers (2 mil) thick. The membrane is positioned between a backing film and a coversheet. DuPont™ Nafion® 212 membranes are based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form, and exhibit substantially lower fluoride ion release compared to the non-stabilized ...

Nafion - Model 115 - Membrane

by Fuel Cells Etc     based in College Station, TEXAS (USA)

Untreated Nafion 115 is 127 micrometers (5 mil) thick. DuPont™ Nafion® 115 membranes are non-reinforced films based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form. The physical properties remain the same for the chemically stabilized membranes, which exhibit substantially lower fluoride ion release ...

Nafion - Model 117 - Membrane

by Fuel Cells Etc     based in College Station, TEXAS (USA)

Untreated Nafion 117 is 183 micrometers (7.2 mil) thick. DuPont™ Nafion® 117 membranes are non-reinforced films based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form. The physical properties remain the same for the chemically stabilized membranes, which exhibit substantially lower fluoride ion release ...

ENVOPUR - Model EDI - Electrochemical Deionisation

by EnviroChemie GmbH Technology for Water     based in Rossdorf, GERMANY

Electro-deionization (EDI) is based on the engineering principle of electrodialysis. It is an electrochemical separation process in which ions from a low concentration solution pass through a special membrane to a solution of higher concentration. The activating force is an electric field between cathode and anode.

TriSep - Model TS40 - Membrane Elements

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

TriSep TS40 Membranes are primarily used in food & dairy and other process applications to separate, purify and desalt organic solutes. TS40 is a piperazine-based nanofiltration membrane with a molecular weight cut-off between 200-300 Daltons. Typical applications include demineralization of whey or lactose, sugar concentration, or separation ...

ProMinent - Nanofiltration Systems

by ProMinent Group - ProMinent GmbH     based in Heidelberg, GERMANY

Nanofiltration is based on the same principle as reverse osmosis. The difference: the separation line is slightly lower. Ions solved into the water are less filtered than with reverse osmosis. This saves operation costs. Typical salt rejection rates are at ca. 80 – 85%. Here, polyvalent ions (e.g. Ca, Mg) are kept back better than univalent ...

Convergence Inspector - Model MBR - Membrane Bio Reactor

by Convergence Beheer B.V.     based in Enschede, NETHERLANDS

The Convergence Inspector Membrane Bio Reactor is based on the conventional wastewater process. The separation of micro-organism is performed by filtration by membranes. The Membrane Bio Reactor system is user-specific for a variety of characterization processes/experiments. All the Convergence Inspectors are fully customized. Almost every type of ...

SpinTek - Stainless Steel Membranes

by SpinTek Filtration, Inc.     based in Los Alamitos, CALIFORNIA (USA)

The SpinTek Td ceramic membrane offers a new tool for the separation of micro-sized solids from liquid, gas and air influent. The unique Td membrane starts as a 185 micron thick stainless steel substrate and then a thin (15 micron) nanopowder coating of ceramic is bonded to the substrate. The ceramic coating has a smooth surface that resists ...

Model TB 250 - Tramp Oil Separator

by MKR Metzger GmbH recycling systemes     based in Monheim, GERMANY

Specific Characteristics: Throughput 200 - 400 l/h, Pre Filter 350 µm, Stainless Steel Angle Section, Self-priming Pump (compressed-air membrane pump), Working without Electrical Connection.

AquaMB Process - Multiple Barrier System

by Aqua-Aerobic Systems, Inc.     based in Loves Park, ILLINOIS (USA)

The AquaMB Process is a multiple barrier system that integrates biological treatment and clarification with dual barrier filtration consisting of cloth media and external membrane separation. It is ideal for wastewater plants that require optimum performance and flexibility at the lowest cost of ownership. Compared to multiple unit processes and ...

Related Terms for membrane separation

Need help finding the right suppliers?

Let the XPRTs do the work for you