Water Aeration Equipment in Afghanistan

Served | Office inNear
559 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water Aeration ×

  • Location: Asia & Middle East ×

  • Location: Afghanistan ×

Cascading Aerator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Cascade Aerators induct air into a water flow in order to oxidize iron and reduce dissolved gases. How it Works: With Cascade Aerators, aeration is accomplished by natural draft units that mix cascading water with air that is naturally inducted into the water flow. Cascade water is pumped to the top of the aerator, and cascades over a series of ...

OxyStream - Oxidation Ditch

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

The OxyStream™ Oxidation Ditch system combines slow speed surface aerators with an oxidation ditch design based on site-specific conditions and our proprietary hydraulic model.

LANDY - Model 7 - Surface Aerator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

The most recent advancement to surface aerator technology can be seen in the LANDY-7 impeller. The Landy impellers have always incorporated a sturdy design with zero failures due to cracked, sheared, or broken impeller blades. This new impeller increases oxygen transfer efficiency and reduces axial and radial loads. The LANDY-7 provides a ...

Zenit - Model OXYPLATE 9-12 - Disc-Shaped Air Diffusers

by Zenit Europe S.A.     based in Bascharage, LUXEMBOURG

Disc-shaped diffusers having elastomer membrane with tiny holes for application in water treatment processes in reactors with continuous or intermittent aeration, especially recommended for high-efficiency permanent installations. The quality, design and membrane hole size ensure unbeatable efficiency in terms of the ideal oxygen transfer-pressure ...

OXYDITCHTM - Oxidation Ditch & EDCTM Clarifier

by GreenTech Water Engineering Co.,Ltd.     based in Beijing, CHINA

Vertical shaft aeration oxidation ditch technology is one of the most successful technologies for the treatment of municipal and industrial wastewater. Worldwide, there are several thousand wastewater treatment plants based on this proven, reliable and cost effective technology. GreenTech offers the following services to its customers. OXYDITCHTM ...

Centrifugal Blowers

by Wollaque Ventilation & Conditioning Pvt Ltd     based in New Delhi, INDIA

We manufacture Centrifugal Blowers in practically all forms and designs to suit any particular application. We supply SISW, DIDW and Multistage Blowers with capacities varying from, few hundred M3/Hr to 3,00,000 M3/Hr. The pressure in case of single stage blowers shall be upto 1200mm WG and beyond that multistage blowers can be offered. We also ...

Optical Design

by Electro-Chemical Devices Inc.     based in Irvine, CALIFORNIA (USA)

The ECD Triton DO8 optical dissolved oxygen sensor combines the high technology of Fluorescence Quenching with a rugged, easy to install design. The DO8 provides the best solution for long term measurements in aeration basins, aquaculture and all types of environmental water.

EUROPELEC - Model SOFIE - High-performance Submerged Turbine Aerator

by EUROPELEC     based in Paris, FRANCE

The SOFIE is Europelec's high-performance submerged turbine aerator and/or mixer with a vertical shaft and is designed to mix and transfer oxygen in waste water as efficiently as possible. The solidly-built components have been selected to guarantee a long life with a reduced maintenance. The SOFIE consists mainly of stainless steel blades rotor ...

AQUADISC - Model 250 - Fine Bubble Air Diffuser

by EUROPELEC     based in Paris, FRANCE

The AQUADISC 250 fine bubble air diffuser distributes the bubbles over the whole membrane surface to increase air/liquid transfer and to avoid coalescence. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial treatment plants.

AQUADISC - Model 320 - Fine Bubble Air Diffuser

by EUROPELEC     based in Paris, FRANCE

The AQUADISC 320 fine bubble air diffuser distributes the bubbles over the whole membrane surface to increase air/liquid transfer and to avoid coalescence. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial treatment plants.

Need help finding the right suppliers?

Let the XPRTs do the work for you