Water Aeration Equipment in France

Serving France | Office in FranceNear France
884 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water Aeration ×

  • Location: Europe ×

  • Location: France ×

Zenit - Model OXYPLATE 9-12 - Disc-Shaped Air Diffusers

by Zenit Europe S.A.     based in Bascharage, LUXEMBOURG

Disc-shaped diffusers having elastomer membrane with tiny holes for application in water treatment processes in reactors with continuous or intermittent aeration, especially recommended for high-efficiency permanent installations. The quality, design and membrane hole size ensure unbeatable efficiency in terms of the ideal oxygen transfer-pressure ...

PERLATOR - Coin Slot (CS) Aerator

by NEOPERL AG     based in Müllheim, GERMANY

The PERLATOR Coin Slot Aerator can be used with cast faucets and needs no brass and no tools. This threaded aerator has an integrated coin slot for easy assembly or disassembly and can be removed with a coin.

MONSOON - Floating Paddlewheel Aerators

by RWL Water LLC     based in Minneapolis, MINNESOTA (USA)

MONSOON floating paddlewheel aerators produce strong horizontal mixing and high oxygen transfer for oxidation ditches, lagoons and tanks. Use individually, or in groups, to develop large overall flow patterns. MONSOON aerators can be used individually or in groups to aerate and mix any or all parts of a basin. Models are available from 2 to 40 Hp ...

Disc Aerator

by IFO Vattenrening, AB     based in Bromma, SWEDEN

The rubber membrane in IFO´s aerators is fitted with a large number of very small slits. Under working pressure, the rubber membrane expands thereby opening the slits and allowing the air quantity necessary for effective oxygenation to pass through. The smaller the holes the smaller the air bubbles and the better the oxygenationcapacity. ...


by Hubert Stavoren B.V.     based in STAVOREN, NETHERLANDS

Vertical shaft low speed Hubair aerator. The Hubair aerator consists of a flat saw tooth shaped plate to which twelve blades are fitted. The top of each blade has been reversed and bends outwards at an upward angle of 35 degree. This influences the direction of water ejection.

Waterix AIRIT - Model 70 - Aerator

by W-Rix Ltd     based in Parainen, FINLAND

Waterix AIRIT 70 is a compact sized and lightweight aerator, which is ideal for aerating both for small sewage basins and lakes. The Waterix AIRIT 70 aerator is especially favoured for aerating of dumping ground seepage, where its special characteristics of easy handling, reliable structure and low energy consumption are best emphasized.

Model 05-01 - Aerators

by Energysmart.se     based in Laholm, SWEDEN

Theft protected aerator, Locked with special key (included), 6 litres/minute, M 24 x 1

Landy 7 - Surface Aerator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

The most recent advancement to surface aerator technology can be seen in the LANDY-7 impeller. The Landy impellers have always incorporated a sturdy design with zero failures due to cracked, sheared, or broken impeller blades. This new impeller increases oxygen transfer efficiency and reduces axial and radial loads. The LANDY-7 provides a ...

Loop Brush Aerator

by Smith & Loveless Inc.     based in Lenexa, KANSAS (USA)

Smith & Loveless' horizontal LOOP Brush Aerators provide premium oxygen transfer and mixing over a wide range of flow conditions. We design LOOP Brush Aerators for the greatest efficiency and cost-effective service.

Kodiak - Model 3 PT - Aerator

by Harco Ag Equipment     based in Harriston, ONTARIO (CANADA)

Core-plug aerators are available in both pull type or 3-point hitch design.  Both are made using a 12' diameter drum that can be filled for additional weight.  All of our aerators include a solid 1'cold rolled steel axle attached to pillow block bearings rather than bushings for longer life and better operation.  Our core-plug ...

Need help finding the right suppliers?

Let the XPRTs do the work for you