Water Aeration Equipment in Oregon

Served | Office inNear
703 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water Aeration ×

  • Location: USA ×

  • Location: Oregon ×

Cascading Aerator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Cascade Aerators induct air into a water flow in order to oxidize iron and reduce dissolved gases. How it Works: With Cascade Aerators, aeration is accomplished by natural draft units that mix cascading water with air that is naturally inducted into the water flow. Cascade water is pumped to the top of the aerator, and cascades over a series of ...

OxyStream - Oxidation Ditch

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

The OxyStream™ Oxidation Ditch system combines slow speed surface aerators with an oxidation ditch design based on site-specific conditions and our proprietary hydraulic model.

LANDY - Model 7 - Surface Aerator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

The most recent advancement to surface aerator technology can be seen in the LANDY-7 impeller. The Landy impellers have always incorporated a sturdy design with zero failures due to cracked, sheared, or broken impeller blades. This new impeller increases oxygen transfer efficiency and reduces axial and radial loads. The LANDY-7 provides a ...

Zenit - Model OXYPLATE 9-12 - Disc-Shaped Air Diffusers

by Zenit Europe S.A.     based in Bascharage, LUXEMBOURG

Disc-shaped diffusers having elastomer membrane with tiny holes for application in water treatment processes in reactors with continuous or intermittent aeration, especially recommended for high-efficiency permanent installations. The quality, design and membrane hole size ensure unbeatable efficiency in terms of the ideal oxygen transfer-pressure ...

Optical Design

by Electro-Chemical Devices Inc.     based in Irvine, CALIFORNIA (USA)

The ECD Triton DO8 optical dissolved oxygen sensor combines the high technology of Fluorescence Quenching with a rugged, easy to install design. The DO8 provides the best solution for long term measurements in aeration basins, aquaculture and all types of environmental water.

Model MARS 3000 - Submerged Aeration Diffuser

by Triplepoint Water Technologies LLC     based in Geneva, ILLINOIS (USA)

The MARS 3000 is a revolutionary next generation submerged aeration diffuser that efficiently provides mixing and aerating in one portable unit. Patented Double Bubble Technology™ combines a static tube aerator with a series of fine bubble diffusers which synergistically combine to break down nutrient material at a rate of efficiency never ...

EUROPELEC - Model SOFIE - High-performance Submerged Turbine Aerator

by EUROPELEC     based in Paris, FRANCE

The SOFIE is Europelec's high-performance submerged turbine aerator and/or mixer with a vertical shaft and is designed to mix and transfer oxygen in waste water as efficiently as possible. The solidly-built components have been selected to guarantee a long life with a reduced maintenance. The SOFIE consists mainly of stainless steel blades rotor ...

AQUADISC - Model 250 - Fine Bubble Air Diffuser

by EUROPELEC     based in Paris, FRANCE

The AQUADISC 250 fine bubble air diffuser distributes the bubbles over the whole membrane surface to increase air/liquid transfer and to avoid coalescence. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial treatment plants.

AQUADISC - Model 320 - Fine Bubble Air Diffuser

by EUROPELEC     based in Paris, FRANCE

The AQUADISC 320 fine bubble air diffuser distributes the bubbles over the whole membrane surface to increase air/liquid transfer and to avoid coalescence. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial treatment plants.

AQUATUBE - Model 90 - Fine Bubble Air Diffuser

by EUROPELEC     based in Paris, FRANCE

The AQUATUBE fine bubble air diffuser is cylindrical in shape and is covered with an EPDM membrane with evenly distributed micro-slots. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial treatment plants. It works best in channel installations.

Need help finding the right suppliers?

Let the XPRTs do the work for you