total coliforms Equipment

16 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water Disinfection ×

  • Keyword: ×

Coliform Bacteria Check for Water Quality Testing Pack of 10

by Camlab Limited     based in Over, UNITED KINGDOM

Use these simple tests to check for bacteria in water without the need for any additional equipment or incubators.

Coliform Test Kit

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

A simple five-tube method to indicate the presence or absence of Total Coliform Bacteria in drinking water. No incubation equipment required. Highly portable, no accessory labware required. Ideal test for well water and coliform breakthrough in distribution systems. Results compare favorably to five-tube MPN method. Includes five glass tubes ...

Palintest - Coliform Testing System

by Palintest Ltd - a Halma Company     based in Gateshead, UNITED KINGDOM

A simple, reliable technique is required which enables the rapid, confirmed enumeration of both total coliforms and more importantly, E. coli. Colitag is a pre-dispensed dry blended reagent formulation containing salts, nitrogen and carbon sources and specific indicator/nutrients for total coliform and E. coli. Positive samples are detected by a ...

Bacteria Check for Water Quality Testing (481197)

by Industrial Test Systems, Inc.     based in Rock Hill, SOUTH CAROLINA (USA)

WaterWorks™ Bacteria Check for water quality testing is the ideal solution when testing for total coliform bacteria.Designed to measure the US EPA standard of 1 colony per 100mL of water, Bacteria Check is the safe, affordable way to determine the need for bacteria treatment. Ideal for service technicians and home owners, Bacteria Check uses a ...

ColiPlate - Convenient Test for Quantitative Measure of Total Coliforms and E. Coli Bacteria

by Environmental Bio-Detection Products Inc. (EBPI)     based in Mississauga, ONTARIO (CANADA)

A convenient test for quantitative measure of total coliforms and E. Coli bacteria. The test is designed to   meet regulatory guidelines and quantifies density of target bacteria, coliforms and E. Coli, ranging from 5 to 5,000 colony forming-units (cfu) per 100 mL sample, without dilutions. Monitoring surface and drinking water for ...

Quanti-Tray & Quanti-Tray - Model 2000 - Coliform and E. Coli Testing

by IDEXX Laboratories, Inc.     based in Westbrook, MAINE (USA)

The IDEXX Quanti-Tray and Quanti-Tray/2000 provide easy, rapid and accurate counts of coliforms, E.coli and enterococci. The IDEXX Quanti-Tray and Quanti-Tray/2000 are semi-automated quantification methods based on the Standard Methods Most Probable Number (MPN) model. The Quanti-Tray Sealer automatically distributes the sample/reagent mixture ...

Source Water Microbe

by Analytical Products Group, Inc. (APG)     based in Belpre, OHIO (USA)

Each sample is one lyophilized quantitative standard containing E. coli in the range 20-200 CFU/100mL or MPN/100mL. Use with all SDWA quantitative methods. Each standard can be used for Total Coliform, Fecal Coliform and E. coli.

Equaris - Biomatter Resequencing Converter (BMRC) and Greywater Treatment System

by Equaris Corporation     based in Afton, MINNESOTA (USA)

The patented Equaris BMRC and Greywater Treatment Systems combine the logic of waste separation and Mother Nature’s principals of composting and extended aeration to safely, efficiently and economically reduce water consumption and environmental pollution.

Hach Lange - Portable Incubator, 12 Vdc, 30 to 50 C (+/- 0.5 C)

by DelAgua Group     based in Marlborough, UNITED KINGDOM

Small and lightweight portable Incubator from Hach Lange designed for field use in Microbiological Environmental Laboratories. Ideal suited for total coliform, fecal coliform and E.coli testing. The incubator may be used for Presence/Absence (P/A), Membrane Filtration (MF) and Most Probable Number (MPN) procedures. Power Source: 12 Vdc via vehicle ...

Coliplate - Test Kits

by Bluewater Bioscience Inc.     based in Mississauga, ONTARIO (CANADA)

Coliplate kit is a convenient test for quantitative measure of total coliforms and E. Coli bacteria. The test is designed to meet regulatory guidelines for surface water, recreational water, processing water and wastewater. The Coliplate test quantifies density of target bacteria, coliforms and E. Coli, ranging from 5 to 5,000 colony forming-units ...

Need help finding the right suppliers?

Let the XPRTs do the work for you