Water Filtration Equipment in Libya

Served | Office inNear
2133 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water Filtration ×

  • Location: Africa ×

  • Location: Libya ×

Sand Separation

by Environmental Products & Technologies Corp. (EPTC)     based in Visalia, CALIFORNIA (USA)

Not all sand separaters are created equal. And on a dairy farm, sand gets in all the places you don't want it to. We use our sand separaters to keep equipment running clean and bright throughout the closed-loop process.

In-Eko - Sand Separator

by Purestream ES, LLC     based in Walton, KENTUCKY (USA)

In-Eko's Sand Separator is another headworks solution that will have a positive impact on your project by removing fine solids such as sand and grit. The Sand Separator helps to prolong the life of downstream equipment by removing damaging particles as well as being easy to operate and maintain. Its compact design makes it easy to include on ...

Huatao Group - Model 16903 - Belt for filter press

by Huatao Wire Belt Factory     based in CHINA

Dear Sir,Our polyester mesh belt product include:Sludge dewatering belt for belt filter press etc..Linear screen in polyester material. For mining filtration, conveyor etc.FGD Desulfurization belt forGypsum dewatering,conveyor etc.Spiral link dryer fabric for dryer,filtration.

Adsorbsia - Arsenic Filters

by Lenntech Water Treatment     based in Delft, NETHERLANDS

Our arsenic filter are filled with ADSORBSIA, a Titanium-based DOW Chemical patented media.

Defender® - Sand Separator

by Toro Equipment S.L.     based in La Cistérniga, SPAIN

The sand remover manufactured by TORO EQUIPMENT S.L. integrate the second phase of pretreatment. Their purpose is to prevent sedimentation in channels and conduits, providing protection for the rest of the plant equipment against abrasion, eliminating overloads and blockages in the following phases and reducing the cleaning tasks for ...

Model PN-S - Belt Filter Presses

by O.C.M. srl     based in Fusignano (RA), ITALY

Belt filter presses PN-S line are enable to dehydrate organic and inorganic sludges. Dehydration on three parts: dripping area, low pressing area, high pressing area. Hydraulic or pneumatic belts tensioning and centering. Hot dip galvanized or stainless steel construction. They have a lower power consumption as well as a lower polyelectrolyte ...

CONTRAFLO® - Solids Contact Clarifier

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

CONTRAFLO® Solids Contact Clarifier - Offering Reliable and Efficient Clarification for More than 50 Years

Rectangular Clarifier

by Fairfield Service Company     based in Marion, OHIO (USA)

The Fairfield Separation process used by FSCI Rectangular clarifier is most commonly used in very large or space constrained municipal and industrial spaces which remove settled as well as suspended solids from liquids. FSCI Rectangular clarifier has ability to handle heavier sludge loads as well as ability to handle high temperature and highly ...

OdisMatic - Model 852R? (45) - Hydraulic Filters

by Odis Filtration     based in Petah-Tikva, ISRAEL

Name: OdisMatic 852R. Product Code: 852R1230. Application: Screen Filtration. Inlet Outlet Diameter: 300 mm / 12″. Max Flow Rate: 600 m³/h / 2630 gpm. Max Working Pressure:10 bar (150 psi). Min Working Pressure:2 bar (30 psi). Filtering Grade:30 micron. Screen Area:10050 cm² / 1560 inch². Operation: Automatic. Control: ...

Belt Presses Filter

by Welders Filtration Technology (WFT)     based in Aalst, BELGIUM

In addition to our extensive range of filter presses, we also produce belt filter presses for use in dewatering municipal and industrial sludge. These machines usually comprise a combination of 2 permeable belts which move over a series of rollers, placing the sludge between the two belts under increasing pressure and forcing out the liquid ...

Need help finding the right suppliers?

Let the XPRTs do the work for you