Water Filtration Equipment in Washington

Served | Office inNear
2806 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water Filtration ×

  • Location: USA ×

  • Location: Washington ×

Sand Separation

by Environmental Products & Technologies Corp. (EPTC)     based in Visalia, CALIFORNIA (USA)

Not all sand separaters are created equal. And on a dairy farm, sand gets in all the places you don't want it to. We use our sand separaters to keep equipment running clean and bright throughout the closed-loop process.

Belt Filter Presses

by Charter Machine Company     based in Metuchen, NEW JERSEY (USA)

Our Regent Press 15 Roll is an enlarged version of the Tower Press.  Seven additional rollers (15 total) provide more retention time, allowing for additional shearing and pressure.  Depending on the solids processed, this could increase cake solids by 2 to 5 percent.Like our standard Tower Press, the Regent models are equipped with ...

In-Eko - Sand Separator

by Purestream ES, LLC     based in Walton, KENTUCKY (USA)

In-Eko's Sand Separator is another headworks solution that will have a positive impact on your project by removing fine solids such as sand and grit. The Sand Separator helps to prolong the life of downstream equipment by removing damaging particles as well as being easy to operate and maintain. Its compact design makes it easy to include on ...

Huatao Group - Model 16903 - Belt for filter press

by Huatao Wire Belt Factory     based in CHINA

Dear Sir,Our polyester mesh belt product include:Sludge dewatering belt for belt filter press etc..Linear screen in polyester material. For mining filtration, conveyor etc.FGD Desulfurization belt forGypsum dewatering,conveyor etc.Spiral link dryer fabric for dryer,filtration.

Adsorbsia - Arsenic Filters

by Lenntech Water Treatment     based in Delft, NETHERLANDS

Our arsenic filter are filled with ADSORBSIA, a Titanium-based DOW Chemical patented media.

Defender® - Sand Separator

by Toro Equipment S.L.     based in La Cistérniga, SPAIN

The sand remover manufactured by TORO EQUIPMENT S.L. integrate the second phase of pretreatment. Their purpose is to prevent sedimentation in channels and conduits, providing protection for the rest of the plant equipment against abrasion, eliminating overloads and blockages in the following phases and reducing the cleaning tasks for ...

Model PN-S - Belt Filter Presses

by O.C.M. srl     based in Fusignano (RA), ITALY

Belt filter presses PN-S line are enable to dehydrate organic and inorganic sludges. Dehydration on three parts: dripping area, low pressing area, high pressing area. Hydraulic or pneumatic belts tensioning and centering. Hot dip galvanized or stainless steel construction. They have a lower power consumption as well as a lower polyelectrolyte ...

CONTRAFLO® - Solids Contact Clarifier

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

CONTRAFLO® Solids Contact Clarifier - Offering Reliable and Efficient Clarification for More than 50 Years

Coalescers / Liquid-Liquid Separators

by AWS Corporation srl     based in Cologno al Serio (BG, ITALY

AWS’s liquid-liquid separation technology can solve a wide range of separation problems involving immiscible liquids. Whether it is capacity constraints, loss of valuable solvents or more stringent environmental compliance, AWS Corp can help you meet these requirements.

Model DDP - Belt Filter Press

by BDP Industries     based in Greenwich, NEW YORK (USA)

The DDP is a high quality, easily maintained belt press designed for the under 1.5 MGD Waste Water Treatment Plant.

Need help finding the right suppliers?

Let the XPRTs do the work for you