Water Modeling Equipment in Belgium

Serving Belgium | Office in BelgiumNear Belgium
522 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water Modeling ×

  • Location: Europe ×

  • Location: Belgium ×

Decom - Combined Filtration System

by LOSMA S.p.A.     based in Curno, ITALY

DECOM is a combined filtration system which works with magnetic discs and filter cloth. Able to filter from 50 to 400 litres per minute for soluble oil, and from 25 to 200 litres per minute for soluble oil, polluted both by magnetic and non magnetic particles. This kind of system is suitable for fine metal machining processes producing metallic ...

Model 001 & 002 - Open Channel Flow Meters

by Valeport Ltd     based in Totnes, UNITED KINGDOM

The Valeport ‘Braystoke’ Model 001 and Model 002 flow meters provide a cost effective and reliable method of monitoring flow in a variety of environments, including salt, fresh and effluent water, from shallow streams to tidal waterways. The meters benefit from the design of the impeller bearings, which give low threshold velocity and ...

Flow Splitter Model 3708

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

The Flow Splitter directs an aerosol sample to as many as four destinations at once. This accessory is especially useful when performing instrument comparison or calibration experiments. Smooth flow transitions provide equal flow distribution. Stainless-steel construction and an electropolished interior prevent the aerosol from being contaminated. ...

Kytola Instruments - Model ExH-ExK - Multi-Block Variable Area Flow Meter Model

by Kytola Instruments     based in Alpharetta, GEORGIA (US) (USA)

Variable area flow meter Model ExK is a high quality acrylic multi-tube flow meter. It is a reliable and easy to read instrument for measuring and monitoring liquid and gas flows. It is available in single-tube and multi-tube version with many options. Model ExK is equipped with flow adjustment valves on the outlet and is also available in ...

Low-Flow Thermodenuder Model 3065

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

The presence of volatile particles and their precursors in particulate exhaust emissions can have great influence over the size measurement when the exhaust cools and dilutes. The Low-Flow Thermodenuder removes precursors and volatile particles from an aerosol sample for subsequent measurement of dry particle size. It is optimized for use with TSI ...

Accu-Tab - Model Series 100 - Aquatics Chlorinator For Aquatics

by Accu-Tab System     based in Pittsburgh, PENNSYLVANIA (USA)

The Accu-Tab Series 100 chlorinator combines with the proprietary 3'/8-inch Accu-Tab Blue SI calcium hypochlorite tablets to deliver predictable rates of chlorine for a variety of HMAC pool water applications. The Series 100 chlorinator has few moving parts and no small openings that can clog; freeing operators from frequent, time consuming ...

Kytola Instruments - Multi-Tube Variable Area Flow Meter Model VE-x

by Kytola Instruments     based in Alpharetta, GEORGIA (US) (USA)

Variable area flow meter Model VE-x is a sturdy industrial flow meter with a heavy-duty impact resistant polymer flow tube. It has a flow adjustment valve on the outlet. It comes in a range of different options and offers a choice of end blocks — aluminum, stainless steel AISI 316 or polyamide. It is a reliable instrument for measuring and ...


by DuPage Water Conditioning     based in West Chicago, ILLINOIS (USA)

Engineered to the highest design and materials standards, the TTF heavy duty model is truly a once in a lifetime investment. Available in seven sizes, you can efficiently condition water for any size residence, as well as modest-size commercial applications. This model is backed by the most inclusive limited lifetime warranty offered by anyone in ...

Kytola Instruments - Model HV, HK, HT - Variable Area Flow Meter Model HV, HK, HT

by Kytola Instruments     based in Alpharetta, GEORGIA (US) (USA)

Variable area flow meters Model HK, HT and HV are industrial flow meters. They have an injection molded impact resistant flow tube with threaded or socket type connections. They are a reliable instrument for measuring and monitoring liquid and gas flows. Typical applications are reverse osmosis, water treatment plants, chemical and process ...

PCH - Loading Shovel - Hydraulic Tipping

by GOUBARD SARL / Goubard S.A.     based in Seiches-sur-le-Loir, FRANCE

Capacity: 0.5 to 4m3. Flat bottom: 5mm sheet metal (0.5m3 to 0.8m3 models) or 6mm sheet metal (1.5m3 to 4m3 models). Bevelled blade: 400 HB, 15mm sheet metal. Welded band reinforces fork pocket entry points. Tipping angle: 120°. Hydraulic dumping: connect a double-acting cylinder to forklift (sideshift carriage). 4m3 model has 2 cylinders. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you