Water Modeling Equipment in North Dakota

Serving North Dakota | Office in North DakotaNear North Dakota
641 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water Modeling ×

  • Location: USA ×

  • Location: North Dakota ×

Hydra - Storm and Sanitary Sewer Modeling Software

by PIZER Incorporated     based in Seattle, WASHINGTON (USA)

Hydra software is a full-featured program used by environmental and civil engineers to model and design urban drainage systems. It helps you estimate wastewater flows, and then calculates the resulting hydraulics within the collection system. It provides tools for managing all types of flows, including sanitary wastewater, stormwater inflow, ...

Model 001 & 002 - Open Channel Flow Meters

by Valeport Ltd     based in Totnes, UNITED KINGDOM

The Valeport ‘Braystoke’ Model 001 and Model 002 flow meters provide a cost effective and reliable method of monitoring flow in a variety of environments, including salt, fresh and effluent water, from shallow streams to tidal waterways. The meters benefit from the design of the impeller bearings, which give low threshold velocity and ...

H2S in Water Analyzer - Model 205

by Analytical Systems International     based in Houston, TEXAS (USA)

The ability to analytically quantify H2S in Water is enhanced with the Sample Transfer Stripper™ STS (Patented Membrane Technology) and the ratiometric colorimetric or solid state sensor technologies offered by Analytical Systems International (ASI). Economic payout is increased because of this automated continuous process or laboratory ...

Flow Splitter Model 3708

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

The Flow Splitter directs an aerosol sample to as many as four destinations at once. This accessory is especially useful when performing instrument comparison or calibration experiments. Smooth flow transitions provide equal flow distribution. Stainless-steel construction and an electropolished interior prevent the aerosol from being contaminated. ...

Hydrocarbon VOC in Water Analyzer - Model 204-V

by Analytical Systems International     based in Houston, TEXAS (USA)

The ability to analytically quantify hydrocarbons and volatile organic compounds (VOCs) in cooling towers, heat exchangers, holding ponds, run-off water, and waste water with our model 204-V hydrocarbon in water monitor is greatly enhanced with the Sample Transfer Stripper S.T.S (patented membrane technology) and the tin oxide sensor and or G.C. ...

Kytola Instruments - Model ExH-ExK - Multi-Block Variable Area Flow Meter Model

by Kytola Instruments     based in Alpharetta, GEORGIA (US) (USA)

Variable area flow meter Model ExK is a high quality acrylic multi-tube flow meter. It is a reliable and easy to read instrument for measuring and monitoring liquid and gas flows. It is available in single-tube and multi-tube version with many options. Model ExK is equipped with flow adjustment valves on the outlet and is also available in ...

Low-Flow Thermodenuder Model 3065

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

The presence of volatile particles and their precursors in particulate exhaust emissions can have great influence over the size measurement when the exhaust cools and dilutes. The Low-Flow Thermodenuder removes precursors and volatile particles from an aerosol sample for subsequent measurement of dry particle size. It is optimized for use with TSI ...

Accu-Tab - Model Series 100 - Aquatics Chlorinator For Aquatics

by Accu-Tab System     based in Pittsburgh, PENNSYLVANIA (USA)

The Accu-Tab Series 100 chlorinator combines with the proprietary 3'/8-inch Accu-Tab Blue SI calcium hypochlorite tablets to deliver predictable rates of chlorine for a variety of HMAC pool water applications. The Series 100 chlorinator has few moving parts and no small openings that can clog; freeing operators from frequent, time consuming ...

Kytola Instruments - Multi-Tube Variable Area Flow Meter Model VE-x

by Kytola Instruments     based in Alpharetta, GEORGIA (US) (USA)

Variable area flow meter Model VE-x is a sturdy industrial flow meter with a heavy-duty impact resistant polymer flow tube. It has a flow adjustment valve on the outlet. It comes in a range of different options and offers a choice of end blocks — aluminum, stainless steel AISI 316 or polyamide. It is a reliable instrument for measuring and ...

TTF MODELS

by DuPage Water Conditioning     based in West Chicago, ILLINOIS (USA)

Engineered to the highest design and materials standards, the TTF heavy duty model is truly a once in a lifetime investment. Available in seven sizes, you can efficiently condition water for any size residence, as well as modest-size commercial applications. This model is backed by the most inclusive limited lifetime warranty offered by anyone in ...

Need help finding the right suppliers?

Let the XPRTs do the work for you