Water Modeling Equipment in Texas

55 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water Modeling ×

  • In: USA ×

  • In: Texas ×

Flow Splitter Model 3708

by TSI Incorporated     Distributor in TEXAS (USA)

The Flow Splitter directs an aerosol sample to as many as four destinations at once. This accessory is especially useful when performing instrument comparison or calibration experiments. Smooth flow transitions provide equal flow distribution. Stainless-steel construction and an electropolished interior prevent the aerosol from being contaminated. ...

Low-Flow Thermodenuder Model 3065

by TSI Incorporated     Distributor in TEXAS (USA)

The presence of volatile particles and their precursors in particulate exhaust emissions can have great influence over the size measurement when the exhaust cools and dilutes. The Low-Flow Thermodenuder removes precursors and volatile particles from an aerosol sample for subsequent measurement of dry particle size. It is optimized for use with TSI ...

AllJetVac - Model P Series - Sewer Cleaner

by Environmental Rental Systems, Inc. (ERS)     based in Rockdale, TEXAS (USA)

AllJetVac P Series combination sewer cleaner models use a positive displacement blower system. The vacuum and jetting systems are powered by the chassis engine, with a wide range of capacities and power options. The new AllJetVac sets the industry standard for high performance and reliability.

CorGal - Tanks With Inverted Roof

by Water Storage Tanks, Inc     based in Austin, TEXAS (USA)

CORGAL tanks are available with inverted or funnel type roof systems. These tanks are often used to capture rain that falls directly onto the tank roof or to contain water that may be directed to the tank from a gutter, downspout or other water conductor pipe.

CorGal - Tanks With No Roof

by Water Storage Tanks, Inc     based in Austin, TEXAS (USA)

CorGal tanks are available without a roof for those applications that do not need to protect the stored product from the sun. The no roof tank consists of corrugated galvanized steel wall sheets only. The no roof tanks are equipped with a geotextile preliner and either a 25 mil. or 40 mil. flexible membrane main liner for water containment.

CorGal - Tanks With Standard 30° Roof

by Water Storage Tanks, Inc     based in Austin, TEXAS (USA)

The most common CORGAL tanks in use are the tanks with 30-degree roofs. This standard tank consists of corrugated galvanized steel wall sheets with a 30-degree galvanized steel roof system. The standard 30-degree roof tanks are equipped with a geotextile preliner and either a 25 mil. or 40 mil. flexible membrane main liner for water containment.

CorGal - Tanks With Corrugated Flat Roof

by Water Storage Tanks, Inc     based in Austin, TEXAS (USA)

CorGal tanks are available with corrugated flat roof systems for those applications that do not desire a pitched roof and where snow loads are not a concern. The corrugated flat roof tank consists of corrugated galvanized steel wall sheets with an interior joist roof system covered with corrugated galvanized steel roof panels. The corrugated flat ...

Car-Tex - Cargo Mate Econo Hauler Wedge

by Car-Tex Trailer Company,Inc     based in Carthage, TEXAS (USA)

Double Rear Doors. 18' Wedge-Front Nose. C/S Door (24' on 5' wide, 32' on 6' & 7' wide, 36' on 8' wide). Semi-Style Camlock Door Latch. Door Hold-Back on Rear Door. Leaf-Spring Axles ( torflex axle optional). Silver Powder Coated Wheels. Nitrogen Filled Tires. Galvanized Roof. Aluminum Top Rails. 16' ATP Stoneguard. 1-12V Dome Light. 2-Flow ...

Marsh McBirney - Model 2000 - Flo-Mate Flow Meter

by Argus-Hazco     Office in Irving, TEXAS (USA)

Marsh McBirney's Model 2000 Flo-Mate is a lightweight, water resistant submersible flow meter designed for open-channel applications. Turbulent/noisy flows are easily metered with two optional data averaging features, Fixed Period Averaging or Constant Mode. Standard outputs include feet/second and meters/second. When the sensor is placed in ...

B10/77 Particle Alarm

by Analytical Technology, Inc. (ATI)     Distributor in TEXAS (USA)

ATI’s Model B10/77 is a simplified particle sensor providing only one channel of particle measurement. The sensor operates from  unregulated 12 VDC power supplies and provides a single isolated 4-20 mA output proportional to particle counts for all particles 2 microns and above. The span of this output is operator selectable for ranges ...

Need help finding the right suppliers?

Let the XPRTs do the work for you