level gauges Equipment in Uruguay

Serving Uruguay | Office in UruguayNear Uruguay
108 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water Monitoring ×

  • Keyword: level gauges ×

  • Location: Latin America ×

  • Location: Uruguay ×

Shand & Jurs - Model 92051 - Marine Tank Level Gauge

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

Over the years Shand & Jurs has provided the marine industry with more float-type gauges than any other manufacturer. Level measurement instruments operating on bulk carriers, product carriers, crude carriers, chemical carriers, ore/bulk/oil carriers, and LNG carriers provide us with the expertise required for the safe handling of liquids for ...

Model TA-T1S - Level Gauge

by Intra-Automation GmbH     based in Grevenbroich, GERMANY

The ITA-T1S Liquid Level Transmitters, vertically mounted in the tank and cable-connected (3-wire) to a remote receiver operates on the float principle. A float guided on a non-magnetic tube follows the level of the liquid surface, thereby actuating the reed switches located inside the tube by means of a built-in magnet system.

Model ITA T1R - Level Gauge

by Intra-Automation GmbH     based in Grevenbroich, GERMANY

The ITA T1R is a multi float ball Level Switch. The total of 6 Switch Points for media up to 100°C and 0,5 kg/dm³ can be combined in one instrument.

Model K9900 Series - Level Gauge

by Kenco Enginering     based in Tulsa, OKLAHOMA (USA)

The patented K9900 Series Level Gauge features an innovative casting design which will simplify the installation process and eliminate other typical problems associated with gauge glass. The K9900 Series incorporates floating misalignment unions, which will allow the process connection centerlines to vary +/-1/4'. The gauge also has integral ...

Babbitt - Model LG-Series - Liquid Level Gauge

by Babbitt International, Inc.     based in Houston, TEXAS (USA)

The Babbitt LG-Series magnetic level gauge consists of a float chamber, a float, and an external indication device. The float chamber is basically a column of 2 1/2 inch pipe with process connections to match those of the storage tank, reactor, drum, column or other equipment where level is to be measured. These connections may be side couplings ...

Model ITA - Magnetic Level Gauge

by Intra-Automation GmbH     based in Grevenbroich, GERMANY

The ITA level indicators offers a reliable, accident-free and maintenance-free usage through a simple and break-resistant construction at a maximum process pressure of 320 bar and a temperature range from -50 °C through 400 °C. The fluid level is indicated directly with a separation of the measurement and indication area. The magnetic ...

OTT Maximum Level Gauge

by OTT Hydromet     based in Kempten, GERMANY

The maximum level gauges show the highest tide wave / surface water level by color marking. They are maximum level indicators for preservation of evidence and offer exact data for a later treatment of a flood event. In a measuring cylinder made of safety glass there is a 1 m long glass-fiber reinforced plastic measuring rod with cm-E-partition and ...

GSI - Model 2550 - Magnetic Level Gauge

by Gauging Systems Inc.     based in Sugar Land, TEXAS (USA)

The GSI-2550 is a low cost mechanical tank gauge for tanks 24 feet in height or smaller. The gauge is a closed system and is not affected by exposure to vapors or product while the tank is in service. There are no guide wires, tapes, top or bottom anchors, thus, no in tank servicing required.

KSR-KUEBLER - Model 700 Series - Sight Glass Level Gauges

by KSR KUEBLER     based in Zwingenberg am Neckar, GERMANY

KSR KUEBLER provides glass level gauges that can be used for most applications in steam generation, but also in the process industry. The  main types of sight glass indicators are the reflex, the transparent and the refraction version. Level Gauges for direct reading of Iiquid levels in vessels and tanks.

Churchill Controls - Winston Liquid Level Gauge

by Churchill Controls Ltd.     based in Berkshire, UNITED KINGDOM

The Winston Capacitive Level Gauge comprises a stainless steel tube with a concentric Teflon-coated wire. It calculates liquid level from the change in capacitance between the tube and the wire due to the dielectric constant of the liquid.

Need help finding the right suppliers?

Let the XPRTs do the work for you