Water Sampling Equipment

620 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water Sampling ×

Myron - pH Buffers - Standard Solutions and Buffers

by Myron L Company

All Myron L handheld instruments are factory calibrated with NIST traceable Standard Solutions having specific conductivity/ppm values. MyronL Company Standard Solutions are made under strictly controlled conditions using reagent grade salts. These salts are mixed with deionized water having a resistivity of at least 5 megohms-cm purity.

RO Meters - Reverse Osmosis Meters for Measuring Total Dissolved Solids

by Myron L Company

The choice of professionals for years, this compact instrument has been designed specifically to demonstrate and test Point of Use (POU) reverse osmosis or distillation systems. By measuring electrical conductivity, it will quickly determine the parts per million/Total Dissolved Solids (ppm/TDS) of any drinking water. With a single “before ...

Stevens Greenspan - CTD 350 - Conductivity/Temperature/Pressure Sensor

by Stevens Water Monitoring Systems, Inc.

The CTD 350 offes multi-parameter conductivity, temperature and pressure sensor designed with a robust ceramic pressure and electrode-less toroidal conductivity measurement sensing system to offer unparalleled reliability. The CTD 350 includes internal data logging. The unit features RS-232 output.

Ultrameter III - 9P - AHL Titration Kit

by Myron L Company

The Myron L Company has designed and manufactured highly accurate and reliable analytical instruments for a wide variety of demanding applications. Thousands of professionals around the world rely on the performance of our instruments every day. Uses range from boiler water testing to ultrapure water control to medical instruments for artificial ...

52769-U - SupelMIP NSAIDs (Non-Steroidal Anti-Inflammatory Drugs) 25 mg / 3 mL

by Sigma-Aldrich/Supelco

Developed and optimized for the extraction of non-steroidal anti-inflammatory drugs (NSAIDs) from aqueous samples such as drinking and waste water. The NSAIDs that we have tested so far include: Naproxen, Clofibric Acid, Diclofenac, and Ibuprofen. The SupelMIP SPE - NSAIDs phase is compatible with other non-carboxylic acid anti-inflammatory drugs ...

28522-U - ATIS Purge and Trap/Humidifier Module

by Sigma-Aldrich/Supelco

A separate module is available that will allow you to purge aqueous samples onto an adsorbent tube at ambient temperatures. This module can also be used to generate a dynamic humidified stream of the carrier gas for spiking calibration standards. The purge and trap module includes purge and trap glassware, and a separate flow controller that ...

53207-U - SupelMIP Riboflavin (vitamin B2) 25 mg / 10 mL

by Sigma-Aldrich/Supelco

A highly selective MIP phase for the selective extraction of riboflavin (Vitamin B2) from milk and other aqueous samples. SupelMIP SPE - Riboflavin was developed for the extraction of riboflavin in the presence of structurally similar vitamins and analogs. Recoveries of up to 85% are consistently obtained. SupelMIP is a registered trademark of ...

Sievers - M9 - TOC Analyzers

by GE Analytical Instruments

Sievers TOC analyzers have always been quick to set up, easy to use, and maintain. The M9 is fast, smart, versatile and instinctively simple. Designed to minimize operator intervention and data interpretation, the M9 allows you to reach the peak of productivity.

28471-U - SLB-5ms Capillary GC Column

by Sigma-Aldrich/Supelco

L × I.D. 30 m × 0.25 mm, df 0.25 μmApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, ...

28566-U - SLB-5ms Capillary GC Column

by Sigma-Aldrich/Supelco

L × I.D. 12 m × 0.18 mm, df 0.30 μmApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you