anaerobic digestion Equipment in Connecticut

164 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water Treatment ×

  • Keyword: anaerobic digestion ×

  • Location: USA ×

  • Location: Connecticut ×

Thermophilic Digestion - Efficient Digestion of Organic Matter in Waste Streams

by Colsen International b.v.

Application: Fermentation represents a natural and anaerobic dissimilation process during which organic biomass is transformed. Certain bacterial strains are capable of converting organic material mainly into methane (CH4), carbon dioxide (C02) and water. The efficiency of the conversion is determined by the system and the nature of the substrate. ...

AppliTek - On-line Monitoring of Anaerobic Digestion

by AppliTek NV - Environmental Analysis Division

Many of the concentrated wastewaters typical of many industrial processes today can be tackled by means of anaerobic digestion (AD), and if necessary with a post-aerobic treatment. Effluents from pharmaceutical manufacturing operations typcially contain several organic solvents, acids, bases, colorants and other organic compounds which are treated ...

AppliTek AnaSense - On-line Analyzer for Anaerobic Digestion

by AppliTek NV - Environmental Analysis Division

The AnaSense is an algorithm-based on-line analyzer for the fast determination of critical parameters in anaerobic digestion processes. VFA, bicarbonates, alkalinity and pH. Volatile fatty acids (VFA) are the intermediary products of the anaerobic process and very important for process control. These are monitored very closely by the AnaSense, ...


Sludge Heating Systems

by WesTech Engineering, Inc.

WesTech offers sludge heating solutions for nearly any anaerobic digestion application. From mesophilic to thermophilic, WesTech's versatility and experience ensure that our sludge heating equipment will provide years of dependable service. We can provide heat exchangers to be piped into existing hot water systems or a complete boiler/ heat ...

Anaerobic Wastewater Treatment Plant

by HTI Systems, Inc. / WeDoTanks.com LLC

Over 20 years of experience in the design of wastewater treatment plants have given wedotanks.com the know-how to design and construct the best precast concrete tanks and systems for both aerobic wastewater treatment plants and anaerobic wastewater treatment plants. Whether you are a municipality or a private company, wedotanks.com (f/k/a HTI ...

Anaerobic Digestion

by GaiaRecycle, Inc.

Anaerobic Digestion (AD) technology uses naturally occurring microorganisms to break down organic waste material in the absence of oxygen to produce and capture biogas, which is mostly comprised of methane and carbon dioxide. There are many applications for AD technologies to produce electricity. This issue has recently gained significant focus, ...

Anaerobic Digestion

by EISENMANN Corporation USA

Anaerobic Digestion is widely used to treat wastewater sludge and other organic waste streams. Almost any organic material can be processed with anaerobic digestion including biodegradable waste materials or feedstocks such as: animal waste and sewage, leftover food, grass clippings, wood or waste paper, thin stillage from ethanol production. With ...

OpenCEL - Anaerobic Digestion

by OpenCEL, LLC - a Trojan Technologies Company

OpenCEL technology provides significant process improvement in anaerobic digestion. By pre-treating the Waste Activated Sludge (WAS) going into the digester, biosolids output for dewatering and disposal is reduced, and biogas production is increased.

Anaerobic digestion

by Ros Roca Envirotec

Anaerobic digestion (AD) is the biological degradation process of organic compounds without using oxygen. The main product of the degredation of the organic compounds is biogas which is a valuable renewable energy source and is used for energy production. AD technology can be used to recycle and valorize organic waste and biomass including high ...


Verderflex - Dura 55 - Peristaltic Industrial Hose and Tube Pumps

by Verderflex Peristaltic Pumps - part of the Verder Group

Maximum Flow Rate: 15.3 m³/hr. Maximum Discharge Pressure: 16 Bar. Port Flange: 316 Stainless Steel Universal slotted design fits with DIN PN16, ANSI 150# & JIS10K. Options: 316 Stainless Steel with Polypropylene or P.V.D.F Insert. Maximum Suction Lift: 9.5 mWc. Maximum Solids Content: 13.75mm compressible. 5.5mm smooth incompressible. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you