Topics

Sections

nitrogen removal Equipment in Saskatchewan

44 Results found
Order by:
Recommended | 
Alphabetical

ISAM™ Integrated Surge Anoxic Mix

by Fluidyne Corporation

The ISAM™ is a total treatment system incorporating BOD, TSS and nitrogen removal along with sludge reduction in an integrated system.

ASTRASAND - TSS, Nitrogen And Phosphate Removal

by Paques B.V.

ASTRASAND® is a continuous sand filter, in which the filter bed is continuously cleaned during the filtration operation. It can be applied for different purposes: for physical-chemical treatment (solids removal) and/or biological treatment (phosphate and nitrogen removal).

ANAMMOX - Ammonia Removal

by Paques B.V.

The ANAMMOX (anaerobic ammonium oxidation) process is an innovative biological process that represents a major breakthrough in nitrogen removal. It is a cost effective, robust and sustainable way of removing ammonium from wastewater and from waste gas. Compared to conventional nitrifation/denitrification, operational costs are reduced by up to 90% ...

AGAR - MBBR

by Aqwise Wise Water Technologies

A robust solution for intensive BOD and Nitrogen removal. The AGAR Moving Bed Bio Reactor (MBBR) configuration offers a treatment process based on a bio-film which provides organic carbon removal, as well as nitrification and de-nitrification where needed, without circulation of activated sludge.

Ecoflex

by Premier Tech Aqua

A compact, reliable, and effective system! Ecoflex is the ideal solution for small spaces and sensitive areas. It is an ultra-compact system designed to remove nitrogen from wastewater. It can be combined with a UV disinfection system for the treatment of bacteria and other pathogens, resulting in further health and environmental protection.

Dynatec - Membrane Bioreactor Systems

by Dynatec Systems Inc.

Dynatec's membrane bioreactor systems are ideally suited for nutrient removal for many reasons. Removal of Nitrogen and Phosphorus from wastewater to very low levels is best accomplished using an MBR system.

Hybas - IFAS - Hybrid Combination Process

by AnoxKaldnes AB - a Veolia Water Company

Hybas hybrid process combines the AnoxKaldnes biofilm technology and activated sludge in the same tank. The Hybas hybrid process is especially suitable for nitrogen removal with municipal wastewater but can also be used for some industrial applications. The advantage for the nitrification process in this advanced wastewater treatment process comes ...

SAGR - Total Nitrogen Removal

by Nelson Environmental Inc.

New effluent quality regulations or changes to the ultimate discharge point of a wastewater treatment system can require that a system meet new Total Nitrogen (TN) effluent limits. For wastewater treatment systems requiring TN removal, a de-nitrification unit process for nitrate removal follows the SAGR nitrification process.

Incineration Industry Emissions Monitoring & Analysis

by Procal

Monitoring of emissions from incinerators is a demanding application for Continuous Emission Monitoring Systems. The emissions produced are highly corrosive, some of the gases are soluble and, because the waste being burnt is constantly changing, the resulting stack gas temperature varies widely.

VOCNOxTherm - RTO + SNCR

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control

The VOCNOx system combines excellent VOC destruction efficiency with sufficient NOx reduction. In several applications the VOCNOxTherm saves on the need for an additional and complete SCR system.


Air & ClimateEnergy & RenewablesEnvironmental ManagementHealth & SafetyMonitoring & TestingSoil & GroundwaterWaste & RecyclingWater & Wastewater