clay pipes Equipment in Lithuania

Served | Office inNear
44 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pipes ×

  • Keyword: clay pipes ×

  • Location: Europe ×

  • Location: Lithuania ×

AXIS - Model GB812 - Guided Boring System

by Vermeer     based in Pella, IOWA (USA)

When it comes to installing sewer and water lines, your main goals are on-grade accuracy and exceptional productivity. The AXIS GB812 Guided Boring System from Vermeer delivers both. The closed-circuit camera built into the drill head allows the operator to constantly monitor line and grade, while the vacuum excavation method removes spoils ...

IPEX Ultra-Rib - Gravity Flow PVC Sewer Pipe

by IPEX     based in Verdun,, QUEBEC (CANADA)

8' - 24' (200mm - 600mm). IPEX Ultra-Rib is a gravity flow PVC sewer pipe with concentric reinforcing ribs that encircle the pipe to provide superior ring stiffness and performance. It is an extruded, seamless pipe made from high grade PVC compound. Ultra-Rib is available in standard sewer sizes from 200mm to 600mm (8' – 24'). Its optimized ...

Groundwater monitoring pipes: Bentonite products

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

When making a bore hole, often to install a monitoring well, impervious strata are often drilled through. If the sealingoperation of such a stratum is not repaired, contamination can easily spread into a water-bearing stratum that was clean prior to the hole being drilled. Here, bentonite can be used as a cheap and relatively simple seal. Due to ...

Densleeve - Clay Drainage Pipes

by Naylor Drainage Ltd.     based in Cawthorne, UNITED KINGDOM

The Naylor DENSLEEVE underground clay drainage system of plain-end vitrified clay pipes and fittings with flexible sleeve couplings, was developed for building drainage and associated sewerage and is manufactured to comply with the stringent requirements of BS EN295.

Ü-Ring

by Mücher Dichtungen® GmbH & Co.KG     based in Ennepetal, GERMANY

The Ü-Ring is used to connect thin walled plain ended pipes (PVCu, Cast Iron, Ductile Iron, as well as EuroTop) to clay pipe sockets with jointing system F (with Lip-Seal).The Ü-Ring complies with the requirements of DIN EN 295-4.

UP-Ring

by Mücher Dichtungen® GmbH & Co.KG     based in Ennepetal, GERMANY

The ÜP-Ring is used to connect thin walled pipes (PVCu, Cast Iron, Ductile Iron, GRP, as well as EuroTop) to clay pipe sockets, with jointing system C.The ÜP-Ring is a moulded ring, which is available from dimension DN 200 – DN 300.The ÜP-Ring complies with the requirements of DIN EN 295-4.

A-Ring

by Mücher Dichtungen® GmbH & Co.KG     based in Ennepetal, GERMANY

The A-Ring is used to connect cut clay pipes to sockets, made of different pipe materials such as cast iron according to DIN 19522-1 or PVCu according to DIN 19543-3.The A-Ring complies with the requirements of DIN EN 295-4.

P-Ring

by Mücher Dichtungen® GmbH & Co.KG     based in Ennepetal, GERMANY

The P-Ring is used to replace the lost spigot joint when a clay pipe is cut.The P-Ring can only be used if the socket to be connected to conforms to jointing system C.An integrated steel ring ensures the correct positioning when joining the cut pipe end into the socket.Before installing the P-Ring, the cut pipe end has to be cleaned and filed to ...

Clay Pipe - Dipping And Glazing

by Schoenbeck GmbH & Co. KG     based in Nienstaedt, GERMANY

Once ceramic clay (sewage) pipes have been dried they are transfered to a dipping and glazing section. This can be carried out fully or in a semi automated manor.

Clay Pipe - Kiln Car Loading

by Schoenbeck GmbH & Co. KG     based in Nienstaedt, GERMANY

Once the pipes have completed dipping and glazing, they are transfered further and loaded onto Kiln cars which then transfer the pipes onwards to the Kiln oven for firing. various lifting methods will be utilised pending the size OD and weight of the pipes being manufactured.

Related Terms for clay pipes

Need help finding the right suppliers?

Let the XPRTs do the work for you