booster pump Equipment in Uruguay

Serving Uruguay | Near Uruguay
62 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: booster pump ×

  • Location: Latin America ×

  • Location: Uruguay ×

Singer Valve - Model 106/206-BPC - Booster Pump Control Valves - Double Chamber

by Singer Valve Inc.     based in Surrey, BRITISH COLUMBIA (CANADA)

The 106-BPC and 206-BPC booster pump control valves are installed in-line, directly downstream of the pump discharge. The pump control valve is normally closed and on pump start-up, a pilot solenoid is energized to open the valve, at a rate governed by the opening speed control. When shut-down is required the pilot solenoid on the valve is ...

Singer Valve - Model 106/206-PG-BPC - Booster Pump Control Valve – Single Chamber

by Singer Valve Inc.     based in Surrey, BRITISH COLUMBIA (CANADA)

The 106-PG-BPC or 206-PG-BPC booster pump control valve is installed in-line directly downstream of the pump discharge. The valve is normally closed, and, on pump start-up, a pilot solenoid is energized to slowly open the valve, at a rate governed by the opening speed control. The pipeline flow is gradually increased.

Pressure Booster Pumps

by Flint & Walling     based in Kendallville, INDIANA (USA)

 Designed to increase water pressure from city mains or private water systems. Powder coated cast iron and stainless steel.

Model SCB-10-120P-48 BL - Solar Centrifugal Booster Pump

by SunPumps, Inc.     based in Safford, ARIZONA (USA)

SunPumps SCB series pressure pumps are multi-stage centrifugals designed primarily for boosting pressure from surface water as long as the water supply is at or above the level of the pump. They are ideal pumps for home pressure systems, sprinkler systems or in-line booster pumps.The pumps are made from 316 stainless steel with a Viton shaft seal, ...

Model SCB-10-150-120 BL - Solar Centrifugal Booster Pump

by SunPumps, Inc.     based in Safford, ARIZONA (USA)

SunPumps SCB series pressure pumps are multi-stage centrifugals designed primarily for boosting pressure from surface water as long as the water supply is at or above the level of the pump. They are ideal pumps for home pressure systems, sprinkler systems or in-line booster pumps.The pumps are made from 316 stainless steel with a Viton shaft seal, ...

Model 740Q - Booster Pump Control Valve

by BERMAD, Inc.     based in Houston, TEXAS (USA)

The Model 740Q Booster Pump Control Valve is a double chambered, hydraulically operated, diaphragm actuated active check valve that opens fully or shuts off in response to electric signals. It isolates the pump from the system during pump starting and stopping, to prevent pipeline surges.

Model SMB-SMB-C - Mechanical Booster Pump

by S3 Instruments     based in ONTARIO (CANADA)

Two shafts are placed in parallel, to which two balanced cocoon-shaped rotors are fixed respectively, and they are driven by a motor. As the rotor is rotated, the gas coming in through the suction port is trapped in the space between the casing and rotors, and then exhausted continuously through the exhaust port, producing vacuum in an efficient ...

Booster Pump Controller

by Tornatech Inc.     based in Saint-Laurent, QUEBEC (CANADA)

Booster pump controllers are installed to automatically start and stop pump motor(s) on system demand in order to maintain a constant pressure in a pressurized water supply system. System demand can be detected by pressure (standard) or current sensing (option). The completely assembled and wired controllers are factory tested before shipping. All ...

BOOSTER - Gear Pump for Polymer Processing

by WITTE Pumps & Technology GmbH     based in Tornesch, GERMANY

The reliable transfer and booster gear pump for polymer processing. BOOSTER gear pumps are used in the polymerisation process, to boost the pressure of medium to high viscosity media. They transport pre-polymers and polymers, e.g. PET, PBT, PS, ABS any many more, very gently Heating is either by way of heat transfer oil or steam. The core ...

Model SNBH - Package Booster Sets

by 3S Norm Pumps     based in Sultanbeyli - Istanbul, TURKEY

It is designed to pressurize water and other harmless (non-explosive, not containing any solid particles and fibers) fluids. SNBH series pressure boosters are manufactured with 1,2 and 3 pumps. It can optionally be manufactured with more pumps. In SNBH series booster systems; ELECTRONIC CONTROL AND PROTECTION (ECP) unit is used. ECP panels are ...

Need help finding the right suppliers?

Let the XPRTs do the work for you