The 106-BPC and 206-BPC booster pump control valves are installed in-line, directly downstream of the pump discharge. The pump control valve is normally closed and on pump start-up, a pilot solenoid is energized to open the valve, at a rate governed by the opening speed control. When shut-down is required the pilot solenoid on the valve is ...
The 106-PG-BPC or 206-PG-BPC booster pump control valve is installed in-line directly downstream of the pump discharge. The valve is normally closed, and, on pump start-up, a pilot solenoid is energized to slowly open the valve, at a rate governed by the opening speed control. The pipeline flow is gradually increased.
Description: A booster pump is a secondary pump added to the dredge pipeline to assist the primary pump in moving the slurry to the desired location.
Booster Pumps provide additional pressure to your Water-Reel when needed to maximize performance. Kifco offers 1Hp Electric, 5.5Hp, 9Hp, 18Hp and 23Hp. Download the Booster Pump Brochure below for detailed information on each model.
A booster pump may be necessary if pressure and flow are not enough for your process. Turbine or open or closed impeller? Single or multi-stage centrifugal? Self priming or flooded suction? Aslan has added all these types of re-pressurization pumps to custom designed skids.
IMS Auxiliary Booster Stations are only necessary when pumping beyond the maximum pumping distance of the dredging system. Multiple booster pumps can be added to the dredge pipeline system allowing the dredge to pump the material up to several miles away if necessary. The boosters can be controlled via remote control from the cabin of the ...
The Model 740Q Booster Pump Control Valve is a double chambered, hydraulically operated, diaphragm actuated active check valve that opens fully or shuts off in response to electric signals. It isolates the pump from the system during pump starting and stopping, to prevent pipeline surges.
Our standard Simplex, Duplex and Triplex Pressure Booster Pump controllers are built with UL 508E rated motor starters and are good for 208V, 240V and 480V 3ph systems up to 20HP.
Papantonatos booster pumps use the technology developed to fit narrow wells. In a similar manner they can be adapted into an existing pipeline to operate as a booster pump.
SEI MH/MHN series, Non Self Priming, Multi Stage, Horizontal Centrifugal Pump is a compact booster pump. The pump has horizontal suction port and vertical discharge port. All wet moving parts on MH series are made of Stainless Steel 304 for long life and better efficiency. On the MHN series the suction and delivery housings are also stainless ...