dewatering pumps Equipment in Georgia

Serving Georgia | Office in GeorgiaNear Georgia
182 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: ×

  • Location: Asia & Middle East ×

  • Location: Georgia ×

Model Type ABS Sanisett 1 and 2 - Lifting Station

by Sulzer Ltd     based in Winterthur, SWITZERLAND

The Sanisett 1 and 2 are single and twin pumping stations designed as a complete wastewater sump for above- or below-ground use. They provide effective dewatering of fecal-free domestic and commercial wastewater, from buildings and areas below the sewer level in accordance with EN 12050-2.

Model 6" WPS - Stainless steel submersible well pumps

by Well Pumps S.A.     based in FLEURUS, BELGIUM

6WPS pumps range consist of four flow models: 16, 30, 45 and 60 m³/h. The pumps are standard equipped with 4 motor up to 5,5 kW and 6 submersible motor from 7,5 kW up to 45 kW power.

Model 8`WPS - Stainless steel submersible well pumps

by Well Pumps S.A.     based in FLEURUS, BELGIUM

8WPS pumps range consist of two flow models: 80 and 100 m³/h. The pumps are standard equipped with 6 motor up to 37 kW and 8 submersible motor from 45 kW up to 110 kW power.

Ebara - Model DMLU - Submersible Pump

by Burt Process Equipment, Inc.     based in Hamden, CONNECTICUT (USA)

A new, economical alternative, the model DMLU non-clog, single channel impeller pumps are suitable for use in commercial and industrial waste water applications. The Model DMLU is constructed of robust cast iron with a large diameter, short overhang shaft and stainless steel fasteners. The single channel impeller has 3'' spherical passage and also ...

Dri-Prime - Model HL250M - Automatic Self-Priming Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin Dri-Prime 12' x 10' (300mm x 250mm) HL250M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL250M offers flowrates up to 5,700 gpm (360 l/sec.), total dynamic heads up to 390 feet (118.9M), and solids handling up to 3' (75mm) ...

Dri-Prime - Model HL160M - Automatic Self-Priming Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin Dri-Prime 8' x 6' (200mm x 150mm) HL160M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL160M offers flowrates up to 2,000 gpm (126 l/sec.), total dynamic heads up to 600 feet (183M), and solids handling up to 1-3/8' (35mm) ...

Dri-Prime - Model HL225M - Automatic Self-Priming Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin Dri-Prime 10' x 8' (250mm x 200mm) HL225M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL225M offers flowrates up to 3,600 gpm (227 l/sec.), total dynamic heads up to 380 feet (116M), and solids handling up to 3' (75mm) in ...

Dri-Prime - Model HL130M - Automatic Self-Priming Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin Dri-Prime 6' x 4' (150mm x 100mm) HL130M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL130M offers flowrates up to 1,300 gpm (82 l/sec.), total dynamic heads up to 650 feet (198M), and solids handling up to 1-3/8' (35mm) ...

Model SF/SFA - Submersible Sump Pumps

by Showfou America, LLC     based in Kaohsiung County, TAIWAN

Continuous duty, Cast iron with stainless steel motor housing, Cast iron impeller, Heavy duty polypropylene strainer, Mechanical seal plus shaft seal, Thermal overload protection, Light weight and energy efficiency, 1HP and up come with double mechanical seals and stainless steel strainer, SFA pumps come with automatic float switch. Applications ...

Model DMLEU - Submersible Sewage Pump

by EBARA Fluid Handling     based in Rock Hill, SOUTH CAROLINA (USA)

The model DMLEU non-clog, single channel impeller pumps are suitable for use in commercial and industrial wastewater applications and are an economical alternative to other competitive submersible wastewater pumps. The Model DMLEU is constructed of robust cast iron with a large diameter, short overhang shaft and stainless steel fasteners. The ...

Need help finding the right suppliers?

Let the XPRTs do the work for you