dewatering pumps Equipment in Arkansas

Serving Arkansas | Office in ArkansasNear Arkansas
182 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: ×

  • Location: USA ×

  • Location: Arkansas ×

Hydraulic Submersible Pumps

by BakerCorp     based in Seal Beach, CALIFORNIA (USA)

Ideal Usage: High suction lift applications such as sewer bypass jobs. Dewatering of mines, quarries and gravel pits.

Ebara - Model DMLU - Submersible Pump

by Burt Process Equipment, Inc.     based in Hamden, CONNECTICUT (USA)

A new, economical alternative, the model DMLU non-clog, single channel impeller pumps are suitable for use in commercial and industrial waste water applications. The Model DMLU is constructed of robust cast iron with a large diameter, short overhang shaft and stainless steel fasteners. The single channel impeller has 3'' spherical passage and also ...

Model Type ABS Sanisett 1 and 2 - Lifting Station

by Sulzer Ltd     based in Winterthur, SWITZERLAND

The Sanisett 1 and 2 are single and twin pumping stations designed as a complete wastewater sump for above- or below-ground use. They provide effective dewatering of fecal-free domestic and commercial wastewater, from buildings and areas below the sewer level in accordance with EN 12050-2.

Dri-Prime - Model HL250M - Automatic Self-Priming Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin Dri-Prime 12' x 10' (300mm x 250mm) HL250M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL250M offers flowrates up to 5,700 gpm (360 l/sec.), total dynamic heads up to 390 feet (118.9M), and solids handling up to 3' (75mm) ...

Dri-Prime - Model HL160M - Automatic Self-Priming Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin Dri-Prime 8' x 6' (200mm x 150mm) HL160M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL160M offers flowrates up to 2,000 gpm (126 l/sec.), total dynamic heads up to 600 feet (183M), and solids handling up to 1-3/8' (35mm) ...

Dri-Prime - Model HL225M - Automatic Self-Priming Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin Dri-Prime 10' x 8' (250mm x 200mm) HL225M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL225M offers flowrates up to 3,600 gpm (227 l/sec.), total dynamic heads up to 380 feet (116M), and solids handling up to 3' (75mm) in ...

Dri-Prime - Model HL130M - Automatic Self-Priming Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin Dri-Prime 6' x 4' (150mm x 100mm) HL130M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL130M offers flowrates up to 1,300 gpm (82 l/sec.), total dynamic heads up to 650 feet (198M), and solids handling up to 1-3/8' (35mm) ...

Stancor - Model CB 2002 - Standard Duplex Pump Control Systems

by Stancor Pumps Inc.     based in Monroe, CONNECTICUT (USA)

NEMA 4X Corrosion Resistant, Outdoor rated Enclosure. Individual Pump Circuit Breakers. Individual Pump Contactors. Transformer. Automatic pump alternator. Separate fused Control Circuit. Green Pump Run Lights (each pump) (Door Mounted). Manual-Off-On-Auto Selector Switch (each pump) (Door Mounted). Individual Terminals For Field Wiring Circuit ...

Model DMLEU - Submersible Sewage Pump

by EBARA Fluid Handling     based in Rock Hill, SOUTH CAROLINA (USA)

The model DMLEU non-clog, single channel impeller pumps are suitable for use in commercial and industrial wastewater applications and are an economical alternative to other competitive submersible wastewater pumps. The Model DMLEU is constructed of robust cast iron with a large diameter, short overhang shaft and stainless steel fasteners. The ...

Stancor - Model CB Series - Standard Simplex Three Phase Pump Control Systems

by Stancor Pumps Inc.     based in Monroe, CONNECTICUT (USA)

NEMA 4X Corrosion Resistant, Outdoor rated Enclosure with SS locking hasp. Pump Breaker, 1 pole for 115 V; 2 pole for 230 V. Pump Contactor, 1 HP at 115 V; 2 HP at 230 V. Separate Control Circuit. Green Pump Run Light (Door Mounted). Manual-Off-Auto Selector Switch (Door Mounted). Individual Terminals For Field Wiring. Circuit Wiring Diaphragm.

Need help finding the right suppliers?

Let the XPRTs do the work for you