drainage pump Equipment in Minnesota

Serving Minnesota | Office in MinnesotaNear Minnesota
110 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: drainage pump ×

  • Location: USA ×

  • Location: Minnesota ×

Pedrollo - Model TOP - Drainage Pumps

by Electrical & Pump Services Ltd (EPS)     based in Mallow, IRELAND

Flow rate up to 400 l/min (24 m3/h). Heads up to 35m. The TOP series is suitable for draining clear water without abrasive particles. The range is very versatile as it comes in a number of configurations from the smallest drainage pump to a multistage which can be used as a booster pump to pressurise water supplies. They are very competitively ...

Pumpex - Model Series PS and SPS - Drainage Pumps

by Pumpex     based in Johanneshov, SWEDEN

Pumpex drainage pumps are submersible to 20 m depth and have no suction lift limitations. This is superior to any self-priming system due to the fact that the pump is installed submerged in the pit. The pump does not need to be moved with varying water levels and it is designed to run dry in case the water level drops too low.

Model DPR 10 - Drainage Pump

by Subteck     based in S.Vito al Tagliamento (PN), ITALY

Single-impeller submersible pumps with jacket in stainless steel, with vertical delivery port. DPR: with open impeller. Motor cooled by the pumped water passing between the motor jacket and the external jacket. Double shaft seal with oil chamber. Minimum dimension and high levels of performance, for use in many different applications, head up to ...

Drainage Pump

by Side Industrie     based in VILLEMER, FRANCE

Submersible Électropompes for waters of drainage and pluviales. General-purpose, resistant in the corrosion and of reduced dimensions, available in three versions with wheel on channels or Whirlpool. Available with or without float. Condenser integrated into the pump.The engine is cooled by the pumped liquid and is equipped with a thermal ...

Model C80 - Drainage Pumps

by HOMA Pumpenfabrik GmbH     based in Neunkirchen-Seelscheid, GERMANY

The C 80 scavenger is suitable for irrigation, water transfer and drainage in clear water. For flat-water exhaust to min. 2 mm. Pumping water from collection tanks, for flood relief and water removal from water courses or reservoirs. Suitable also for water circulation in garden ponds and cascades.

Vortex - Model VOX 1 - Plastic Bodied Drainage Pumps

by Vortex Pompa Hidrofor-Gür Mühendislik Ltd.Sti     based in Yenisehir / IZMIR, TURKEY

Plastic Bodied Drainage Pumps. 0.33 HP TO1¼' With Outlet Hole. Pump Performance:6 mss - 1.2 TONE/h. 4 mss - 4 TONE/h. 1 mss - 7.2 TONE/h.

Wilo - Model KS - Submersible Drainage Pumps

by Wilo USA LLC     based in Rosemont, ILLINOIS (USA)

Special features / product benefits: Submersible drainage pumps in rugged design for use on building sites. Mechanical seal independent of direction of rotation. Heavy-duty motors (oil-filled and dry) ensure permanent operation even with nonimmersed motor. Corrosion-resistant components.

Model BIBO Series - Lightweight Site Drainage Pumps

by Patriot Pumps     based in Waterford, MICHIGAN (USA)

Lightweight site drainage pumps with heavy duty performance, this versatile range of pumps is ready to solve any dewatering or drainage problem. For industrial applications involving various types of corrosive or abrasive media, Flygt can offer many sizes of drainage pumps and components made of materials adapted to the intended use.

Lutz - Complete Drainage Pump Tube

by BASCO, Inc     based in University Park, ILLINOIS (USA)

This relatively small 41mm diameter pump tube fits comfortably through a 2'' bung opening. Almost 100% drainage is possible when the drum is tilted using BASCO´s EnviroWedge™. Non-lubricated pump tube prevents contamination of the liquids pumped. When closed, sealing pot prevents runback when tube is extracted. Lutz® Complete ...

Mody - Electric Submersible Drainage Pumps

by Hydro+     based in Suarlée, BELGIUM

Impeller in hardened stainless steel 410 (56 HRC). Epoxy coated aluminium outer casing. Double mechanical seal, oil lubricated. Each mechanical seal has tungsten carbide faces. Pumps available in stainless steel 316 for corrosive applications. Vortex models for solids handling applications. Pump starter available in option.

Need help finding the right suppliers?

Let the XPRTs do the work for you