impeller pumps Equipment in Jamaica

Serving Jamaica | Near Jamaica
721 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: ×

  • Location: Latin America ×

  • Location: Jamaica ×

Low NPSH Regenerative Turbine Chemical Pumps

by Roth Pump Company     based in Rock Island, ILLINOIS (USA)

Roth regenerative turbine chemical duty pumps provide continuous, high pressure pumping of non-lubricating and corrosive liquids. These regenerative turbine pumps are provided with one piece, machined self-centering impellers for operation with a wide variety of chemicals with process heads up to 1400 ft. (427 m.), 600 psi (40 bar), TDH at 3500 ...

Model RVS - Liquid Ring Vacuum Pumps

by ROBUSCHI S.p.A.     based in Parma, ITALY

Liquid ring vacuum pumps are a single stage block model, suitable to compress gas and vapours in the industrial processes.

Model BBA B - Jet Pump

by Heide Pumpen GmbH     based in Gelsenkirchen, GERMANY

The B range of pumps have been designed with a clear focus on reliability, efficiency and durability. Featuring an open impeller configuration in combination with a changeable wear plate, facilitating servicing and minimising costs of spares. All B series pumps are fitted with a non return valve in the suction port, eliminating the need for a foot ...

Ebara - Model DMLU - Submersible Pump

by Burt Process Equipment, Inc.     based in Hamden, CONNECTICUT (USA)

A new, economical alternative, the model DMLU non-clog, single channel impeller pumps are suitable for use in commercial and industrial waste water applications. The Model DMLU is constructed of robust cast iron with a large diameter, short overhang shaft and stainless steel fasteners. The single channel impeller has 3'' spherical passage and also ...

Model GL - Multistage High Pressure Pump

by Apollo Goessnitz GmbH     based in Goessnitz, GERMANY

Multistage High Pressure Pump Q = 500 m³/h. H = 320 m. P = 25 bar. T = 140 °C.

Model HTS - Single Stage Peripheral Turbine Pump

by CDR Pumps (UK) Ltd     based in Wellingborough, UNITED KINGDOM

The HTS is a single stage peripheral turbine pump, magnetic driven, in a close-coupled execution, suitable for low flow and high pressure applications.The AISI 316L Stainless Steel components are investment casted, while the magnets are in Neodymium-Iron-Boron, ensuring coupling efficency even when processing heavy liquids. Graphite bushings offer ...

Model HTN - Single Stage Peripheral Turbine Pump

by CDR Pumps (UK) Ltd     based in Wellingborough, UNITED KINGDOM

The HTN is a single stage peripheral turbine pump, magnetic driven, in a close-coupled execution, suitable for low flow and high pressure applications.The pump casing is non metallic (PP or PVDF), machined from full material, in order to grant high mechancial resistance.Further components are non metallic (PP or PVDF), injection moulded and ...

Dri-Prime - Model HL250M - Automatic Self-Priming Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin Dri-Prime 12' x 10' (300mm x 250mm) HL250M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL250M offers flowrates up to 5,700 gpm (360 l/sec.), total dynamic heads up to 390 feet (118.9M), and solids handling up to 3' (75mm) ...

Dri-Prime - Model HL160M - Automatic Self-Priming Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin Dri-Prime 8' x 6' (200mm x 150mm) HL160M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL160M offers flowrates up to 2,000 gpm (126 l/sec.), total dynamic heads up to 600 feet (183M), and solids handling up to 1-3/8' (35mm) ...

Dri-Prime - Model HL225M - Automatic Self-Priming Pump

by Aquatech Dewatering Company     based in Maple, ONTARIO (CANADA)

The Godwin Dri-Prime 10' x 8' (250mm x 200mm) HL225M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL225M offers flowrates up to 3,600 gpm (227 l/sec.), total dynamic heads up to 380 feet (116M), and solids handling up to 3' (75mm) in ...

Need help finding the right suppliers?

Let the XPRTs do the work for you